User manual VICTORINOX SWISS ARMY CHRONO CLASSIC XLS ALARM

[. . . ] CHRONO CLASSI C XL S AL ARM INST RUCTI ON M ANUAL vIctorInox swIss army InstructIons for use I. general InformatIon : ­ Multi-function movement ­ Initial status ­ Chronograph active 2 2 2 II. [. . . ] Alarm cannot be adjusted when the chronograph is active. 2| Chrono Classic XLS Alarm ­ Instruction Manual Seconds Counter Minute Hand Hour & Minute counter Alarm & Reference Time Pusher A Hour Hand Crown Date Pusher B |3 II. technIcal InstructIons settIng the tIme and date : w Pull out crown to position II w Turn crown until yesterday's date appears w Pull out crown to position III (the alarm display changes from alarm time to reference time) w Turn crown until correct date appears (at 12 midnight) w Continue to turn crown to desired time w Push in crown to position I (the alarm display changes from reference to alarm time) rapId date adjustment : w Pull out crown to position II w Turn crown until correct date appears w Push crown back to position I Please Note : Resetting the time also requires the identical correction of the reference time ­ please refer to "setting the reference time". 4| Chrono Classic XLS Alarm ­ Instruction Manual Set date I II III Set time |5 II. technIcal InstructIons reference tIme : What is `reference time' ?­ The current time is displayed by the hour and minute hand, however parallel to this, the reference time runs in the background. The alarm function refers to this reference time. This means that both the current time and reference time must always be synchronized to ensure alarm sounds at correct time ­ any adjustments made to the current time have to also be made to the reference time. settIng the reference tIme : w Pull out crown to position III w Press pusher B for at least 2 seconds to activate setting mode w Small minute hand will jump forward 1 second to indicate mode is active ­ reference time can now be set to match current time w short pressing of pusher B (less than 1sec) moves reference time forward by the minute w medium pressing (1 ­ 2 sec) moves reference time forward by the hour w long pressing (longer than 2 sec) ­ reference time is moved forward until pusher is released w Push in crown to position I w Display changes from reference time to alarm time w A signal indicates alarm is switched off 6| Chrono Classic XLS Alarm ­ Instruction Manual I Pusher B III Small minute hand Reference time |7 II. technIcal InstructIons settIng alarm tIme : Press pusher B for at least 2 seconds to activate setting mode. Small minute hand will jump forward 1 second to indicate mode is active ­ alarm time can now be set w short pressing of pusher B (less than 1sec) moves alarm time forward by the minute w long pressing (longer than 2 sec) ­ alarm time is moved forward until pusher is released Please Note: If the push button is not activated for 10 seconds, the alarm setting mode is deactivated. At the same time two beeps are emitted to indicate alarm is on. [. . . ] reInItIalIzIng the chronograph hands: w Pull out crown to position III w Press pushers A and B simultaneously for at least 2 seconds w The seconds chrono hand will rotate to indicate mode is activated reset seconds chrono hand w Press pusher A to revert hand to zero position w Press pusher B to activate Hour & minutes resetreset hour & mInutes counter w Press pusher A to revert hands back to zero position (Hands are mechanically coupled, so will revert together) w Push in crown to position I 10 | Chrono Classic XLS Alarm ­ Instruction Manual Pusher A Seconds counter Hour counter Minute counter I Pusher B III | 11 VSAS08054 Victorinox Swiss Army, Inc. Box 1212 ­ Monroe, CT 06468-1212 Consumer Service: 800 442 2706 www. swissarmy. com © Victorinox Swiss Army, Inc. [. . . ]