User manual VICTORINOX SWISS ARMY CHRONO CLASSIC XLS MT

[. . . ] By doing so you will be protecting the environment and human health. *Applicable in EU member countries and countries with similar legislation. Please check the details on the back of your Victorinox Swiss Army timepiece case and read the following information carefully: Water-resistant to 3 atm (100 feet/30 meters). Resistant to rain, splashes and accidental immersion, but must not be worn in the shower or when swimming. [. . . ] The following information appears on the dial in quick succession depending on the direction of the crown rotation, following a sequential order of 1 to 9 (turn the crown counter-clockwise) or 9 to 1 (turn the crown clockwise). After a battery change, or exceptionally in the event of a malfunction, you must always synchronize the time indication by the hands with the time indication by the digital numerals on the dial. The time which appears on the lower display is different from the time shown by the hands. ­ Turn the crown in either direction until the hands show the same time as the numerals on the digital display ( ): The selected functions are identified by the alphabet symbol, which appears in the upper section of the dial. A rapid rotation advances or retracts the hands by one full hour, a slow rotation enables the minutes setting to be corrected. ­ Set the correct time by turning the crown either clockwise or counter-clockwise: There are 2 time display modes: ­ once 24 hours ­ twice 12 hours: AM from midnight to midday PM from midday to midnight. ­ In the 12-hour mode, a small letter P appears between midday and midnight alongside the numerals displaying the hours. ­ Push the crown twice to return to 24-hour mode. A rapid rotation advances or retracts the hands by one complete hour, a slow rotation enables the minutes setting to be corrected. Setting the time), or after a certain period of time in operation, if the timepiece is showing a slight inaccuracy, the time can be set to the exact second. ­ While the numerals displayed for seconds are flashing, push the crown to synchronize the time with a time reference. Between 31 and 60 seconds, the time will be adjusted to the next minute. ⭠Check that the minute display ( ) is showing exactly the right time. If needed, correct the time by plus/ minus one unit (3. A letter appears in the place of the date ( language in which the day is displayed: E = English, F = French, S = Spanish, D = German. ­ Turn the crown clockwise or counter-clockwise to obtain the desired language and year: a rapid rotation changes the language, a slow rotation changes the year. The language and year disappear and the day of the week and the date reappear. If date, month and year are set, the day of the week will be defined automatically (perpetual calendar). The seconds disappear and the numeral for the month appears alongside the date ( ). ­ Turn the crown clockwise or counter-clockwise: a rapid rotation changes the month, a slow rotation changes the date. The month display disappears and the seconds display reappears. Note: Even if the month is not displayed while the timepiece is being used in normal mode, it is still necessary for it to be set otherwise the perpetual calendar will not function correctly (up to 2099). [. . . ] Timed period > 1 min and < 1 hour: ­ Minutes ­ seconds ­ hundredths alternately with modes SP + or Ad. Timed period > 1 hour and < 48 hours: ­ Hours ­ minutes ­ seconds alternately with modes SP + hundredths or Ad + hundredths. Test of alarm Push the crown and hold down for more than 2 seconds after first selecting the Alarm (AL) function (Fig. The alarm will start to sound at this point. [. . . ]