User manual VICTORINOX SWISS ARMY GENERAL MULTI-WATCH

[. . . ] By doing so, you will be protecting the environment and human health. *Applicable in EU member countries and countries with similar legislation. The rotating bezel enables divers to measure both dive time and any other lapse of time. [. . . ] May be worn when swimming or free diving and scuba diving. water-resistant to 50 ATM (1650 feet/500 meters). May be worn when swimming or deep-sea diving. Meter and bar are different things: underwater, there is combined air and water pressure. A depth of 10 meters equals 1 bar of water pressure and 1 bar of atmospheric pressure above water level, therefore 2 bars in total. (Remember to screw it back down if you have a screw-down model) Adjusting the date and day: 1. Turn it away from you for the desired date. Turn it towards you for the desired day. Crown in position 1 (unscrewed) You must wind any simple mechanical timepiece daily and at a regular time in order to ensure smooth running of your timepiece. All you have to do is turn the crown away from you until you feel a slight resistance (to avoid damaging the mechanism, do not overwind). For timepieces fitted with an automatic winding function: the timepiece winds itself automatically as you move your wrist. If your timepiece stops or is not worn sufficiently, perform the same operation as for a manual timepiece (a few turns of the crown will suffice). To return the three chronograph hands to zero, use pusher B. To avoid any errors, do not perform this operation between 21. Intermediate/split time function: The intermediate/split time function enables users to stop the hands to read an intermediate time while continuing timing. When the hands are restarted, the chronograph makes up the elapsed time. Press pusher A again (to make up elapsed time). Do not operate the pushers or crown when your timepiece is underwater or if it is wet. [. . . ] Push the crown back to position 1 once the desired time is set. The alarm can only be set to operate within 12 hours of the time being set. Setting the alarm hands on the dial subdivisions between the numerals allows accurate setting at 15 minute intervals. [. . . ]