User manual VIETA CDV7000BT

[. . . ] Some brand of Mobile Phone like Sony Ericsson may have "Power Saving Mode" selection when Blue Tooth mode is switched on. PLEASE DO NOT Switches ON Power saving Mode when operating with this Head Unit, as some abnormal communal behavior will happen occasionally if Power Saving Mode is switched on. Before user make Outgoing call or Incoming call, make sure the mobile phone's "Blue Tooth function" was switched "ON". To ensure the best conversation quality / performance, please always keep talking within 1 meter of the Head Unit. [. . . ] To terminate the pairing, you can press the "CLEAR(BAND)" button at any time. Select the Blue Tooth set up on the Mobile Phone Please refer to the instruction manual of your mobile phone on how to enter into the blue tooth set up and blue tooth on / off, and blue tooth pairing. "BT60" should appear in the pairing list on the mobile phone. User need to select "BT60" and then input the password "1234". If the pairing is successful, the display will show PARING OK !will be flashing on the Display for 3 seconds. And the unit will switch back to the previous mode automatically. During the Pairing, only Power, CLEAR(BAND) , Volume +/- & Mute are functional, other function keys are disabled & non-operational during the pairing mode. Re-Connection Of The Blue Tooth System The unit is with built -in Auto-Reconnection function. In some conditions, user need to reconnect manually. If The Mobile Phone is out of range. ( 2 meters away from the Head unit) Under the condition of lost connection when the user come back to the unit. At the same time, there is an incoming call or user is under conversation on the Mobile Phone 2 meters away from the Head Unit and come back to Head unit. If user wants Audio Transfer back from Mobile Phone to Head unit. The unit can be re-connected by the following methods. Access into MENU RECONNECT mode to activate the manual RE-Connection. Pls see MENU Operation for more details of how to access into MENU mode. Once the RECONNECT is display on the LCD , press the AUDIO button to activate the manual Re-Connect mode. 1. Keep the mobile phone within 2 Meter from the unit when making the connection. 2. The manual re-connect is only function with the Mobile Phone has already been paired with the unit before. The LCD Display will displayed RECONNECT . . . If the re-connection is successful, the LCD Display will display RECONNECT . [. . . ] To end the conversation, press the "CLEAR(BAND)" button . The unit will switch back to the previous mode automatically. The mute of the previous mode will be released at the same time. During the talking mode, if the Ignition is being turned off, the unit will keep the conversation even if the Ignition is Switched off. [. . . ]