User manual VIETA CDV7200BT

[. . . ] SAFETY INFORMATION When Driving Keep the volume level Iow enough to be aware of the road and traffic conditions. When Car Washing Do not expose the product to water or excessive moisture. This could cause electrical shorts, fire or other damage. Caution: In order to avoid any accident, the driver must not watch video while driving. [. . . ] "BT60" should appear in the pairing list on the mobile phone. User need to select "BT60" and then input the password "1234". If the pairing is successful, the display will show PARING OK !will be flashing on the Display for 3 seconds. And the unit will switch back to the previous mode automatically. During the Pairing, only Power, CLEAR(BAND) , Volume +/- & Mute are functional, other function keys are disabled & non-operational during the pairing mode. Re-Connection Of The Blue Tooth System The unit is with built -in Auto-Reconnection function. In some conditions, user need to reconnect manually. If The Mobile Phone is out of range. ( 2 meters away from the Head unit) Under the condition of lost connection when the user come back to the unit. At the same time, there is an incoming call or user is under conversation on the Mobile Phone 2 meters away from the Head Unit and come back to Head unit. If user wants Audio Transfer back from Mobile Phone to Head unit. The unit can be re-connected by the following methods. Access into MENU RECONNECT mode to activate the manual RE-Connection. Pls see MENU Operation for more details of how to access into MENU mode. Once the RECONNECT is display on the LCD , press the AUDIO button to activate the manual Re-Connect mode. 1. Keep the mobile phone within 2 Meter from the unit when making the connection. 2. The manual re-connect is only function with the Mobile Phone has already been paired with the unit before. The LCD Display will displayed RECONNECT . . . If the re-connection is successful, the LCD Display will display RECONNECT . will switch back to the previous mode automatically. If the re-connection failed, the LCD Display will display RECONNECT And the unit will FAIL !switch back to the previous mode automatically. E - 31 The unit will be Auto Re-Connection by following operation . [. . . ] The unit can support playback Music Player which have USB Interface. However due to the fast changing decoder technology and different kind of hardware interface, this unit may or may not be compatible to all the Music Player and USB Stick especially those USB Stick / Player which require to install a program driver. About Music Flash Player with USB Interface, usually, the unit takes longer time to read this kind of player than normal USB Stick. Especially, if the Flash Player with built-in power battery sometimes takes 20-30 seconds to start up the playback This unit is not compatible to any Portable type Hard disk. [. . . ]