User manual VIETA CPD1000D

[. . . ] Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN N Notes on Copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U. S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by macrovision Corporation. Reverse engineering or disassembly is prohibited. SERIAL NUMBER: You can find the seral number on the back of the unit. This number i is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. [. . . ] Helpful Hint: - Program can be activated only when a disc is in the DVD player. - When the program menu appears, the setup menu setting is forbiddened. Program:TT(06)/CH(- -) 1 2 3 4 5 TT: TT: TT: TT: TT: CH: CH: CH: CH: CH: Exit 6 7 8 9 10 TT: TT: TT: TT: TT: CH: CH: CH: CH: CH: NEXT 2. Use the numerical keypad(0-9) to direct input the titles, tracks or chapters (single track number with digit '0' in front , for example '05'). 3. Move the cursor by pressing to select START. Program:TT(06)/CH(- -) 1 2 3 4 5 TT: 06 CH:01 TT: 05 CH:01 TT: CH: TT: CH: TT: CH: Exit 6 7 8 9 10 Start TT: TT: TT: TT: TT: CH: CH: CH: CH: CH: NEXT 4. To resume normal playback from programmed playback, Press PROGRAM and press STOP button on the program menu. Program:TT(06)/CH(- -) 1 2 3 4 5 TT: 06 CH:01 TT: 05 CH:01 TT: CH: TT: CH: TT: CH: Exit 6 7 8 9 10 Stop TT: TT: TT: TT: TT: CH: CH: CH: CH: CH: NEXT 15 When this unit is not used, please turn off the power and leave no disc inside. Basic operation DIGITAL CARD and USB Play operation Digital cards (MMC/SD&Memory Stick Type) and USB with MP3& Pictures (. jpg) may be played and displayed through the unit. Memory Stick; MMC/SD cards may be directly input through the card reader slot. The USB Socket can be used to supply signals to the unit from USB sources. How to select DIGITAL USB/CARD to play 1. Insert either a USB source or a Card into the appropriate USB connection point on the right or the MMC/SD card reader on the left. Press "USB/CARD" button on the remote control to switch. Press "USB/CARD" button on the remote control to switch. 1) If insert" Memory Stick" card to the DIGITAL CARD socket, the screen displays, " U3" when the unit was switched to DIGTTAL CARD play. 2) If insert " MMC " card or "SD"card , the screen displays " U4" when the unit was switched to DIGITAL CARD play. When playing MP3 songs and digital pictures in USB and Digitial Card, the unit features mute, repeat, and zoom play. Operations are the same as MP3 operation. NOTE: According to the content of the USB and DIGITAL CARD, the display picture will be different. 3. Press the "USB/CARD" button on the units main panel , and the units would auto detect the USB/CARD socket. If USB/CARD is selected, the unit will begin to read the CARD or USB connected to it . USB/CARD 16 SETUP Menu Setting General Operation&General Setup Page Dolby General Operation 1. Press SETUP to enter the Setup Menu. 2. Press ENTER to enter the next level submenu or confirm your selection. 3. Press to enter the submenu or returen to the previous menu 4. Press to highlight the desired menu. To exit from the menu Press SETUP The settings will be stored in the player's memory even if the player is switched off. - - General Setup Page - TV Display Angle Mark OSD lang SPDIF Output Captions Screen Saver PS On ENG On On Normal/PS Normal/LB Wide Set TV Display Mode 1. Press to highlight 'TV Display'. 3. Move the cursor by pressing to highlight the selected item. General Setup Page The options included in General Setup page are:" TV Display", "Angle Mark", "OSD lang", "SPDIF Output", "Captions", "Screen Saver". [. . . ] The batteries are depleted: replace them with new ones. Point the remote control unit at the remote control sensor and operate. Remove the obstacles between the remote control unit and the remote control sensor. Operate the remote control unit at a distance of not more than 8 meters from the remote control sensor. [. . . ]