User manual VIETA CTF72MC

[. . . ] Be careful with electricity when changing the original as this may cause the appliance to burn or catch fire. Please warn passengers to avoid colliding with the monitor, causing unnecessary head injuries. Discarded displays must be disposed of according to local regulations. [. . . ] 2. 3. 4. 5. 6. 7. 3 Operating the Display Unit a b c d e f POWER: Switching the unit ON and OFF VOL -: Decrease Volume VOL +: Increase Volume MENU: Select button to access the on-screen OSD menu and adjustment selection AUX: Source selection IR SENSOR: There is an IN Sensor that receives the remote control commands and the wireless headphones at the front of the housing DOME LIGHT SWITCH: The built-in Dome Light has three operating modes ON- The Dome Light remains ON at all times OFF- The Dome Light remains OFF at all times DOOR-The Dome Light will turn ON and OFF whenever the vehicle's doors are opened or closed, respectively. h MONITOR OPEN BUTTON: Press this button to release the Monitor Panel. The Panel will drop down slightly allowing you to fully open to it. To close, press the LCD Monitor Panel firmly back up into the housing until a click is heard g i LED DOME LIGHT: The Dome Light using LED j k l HEADPHONE OUTPUT1: Output jack is provided for wired headphones AUX3 INPUT: Audio and video input (A/V) AUX3 HEADPHONE OUTPUT2: Output jack is provided for wired headphones 4 Operating the Remote Control a b c d e f PWR: Turns the unit ON and OFF (AUX1. AUX2 switch) CH+: changes TV channels up CH-: changes TV channels down VOL+: Volume increase VOL-: Volume decrease MENU: On-screen menu access/exit OSD 5 SmartView Swivel Mechanism 1. Turn on the power supply Gently press the remote control or V 2. Gently press the "Open" button. The screen will automatically open Warning The screen can be extended to a maximum angle of 105º. Pushing it beyond this point could damage the device. 3. Manually adjust the screen position to your preferred angle 4. Adjust left and right angles as shown below: Warning V The left/ right positions can be extended to a maximum angle of 25º. Pushing it beyond this point could damage the device. 6 SmartView Swivel Mechanism 5. V Turning off the device Before turning off the device, centre the screen and continue to push upwards to turn off the device fully. Warning V V Make sure the screen has been centered before pushing upwards to turn off the device fully or the device could be damaged. Before pushing the screen upwards to turn off the device, do not turn the screen left or right as this could damage the device. Before closing the screen fully, please ensure no external particles or residue is left on the screen. V 7 Adjusting the Volume Adjusting the Volume V. Gently press the Remote Control or press the "Vol +" button on the device to increase the volume Gently press the Remote Control or press the "Vol -" button on the device to lower the volume Note: Under normal circumstances, the "Vol +"and "Vol -" buttons are used to control the volume and not to adjust the menu. Lighting (LIGHT) On the Menu screen, select the 'LIGHT' option to begin adjusting the picture lighting. [. . . ] N. B. : The present Menu is NTS Compatible. 8 Electrical Installation Wiring Diagram: 1. Connect AUX1, AUX2 input channels to multiple media sound capabilities, e. g. DVD changer, DVD player, GPS and Digital TV etc. [. . . ]