User manual VIETA DVD-2

[. . . ] DVD-2 Instruction Manual Manufactured under license from Dolby Laboratories, "Dolby", "Pro Logic" and the double-D Symbols are trademarks of Dolby Laboratories. Copyright 1992-1997 Dolby Laboratories, Inc. All rights reserved. Table of Contents Safety Information Precautions Accessories Features Definintion of Terms Basic Connection Control Reference Guide 1. Remote Controller Unit 4. 1 General Function for Remote Control Unit 4. 2 Basic Function 4. 3 Advanced Function 4. 4 DVD Function 4. 5 SETUP Function 5. [. . . ] When the first chapter or track is encountered, if playing a VCD or Audio CD, it stops playing and goes to the stop status. If playing a DVD, it starts playing from the first chapter. SKIP REVERSE 5. 9 SLOW Use this function when you want to view the movie slowly. This function works only for DVD or VCD. 5. 9. 1 SLOW FORWARD 1 Press PAUSE or STEP button during play mode By pressing PAUSE or STEP button, it pauses the playing temporarily. 2 Press FF/SF button If FF/SF button is pressed under PAUSE or STEP, SLOW 1/2 is displayed and the speed of forward direction becomes slower. 3 Press FF/SF button again If FF/SF button is pressed again, SLOW 1/4 is displayed and the speed changes even slower. If pressed again SLOW 1/8 is displayed and it changes slower in conformity to the ratio. To return to normal play, press PLAY button (DVD and VCD) or FF/SF button again (VCD only) under SLOW 1/8 state. The CLEAR button clears slow state at any speed of slow. 27 SLOW 1/2 SLOW 1/4 SLOW 1/8 5. 9. 2 SLOW REVERSE (DVD only) 1 Press PAUSE or STEP button during play mode By pressing PAUSE or STEP button, the play mode is temporarily paused. 2 Press FR/SR button If FR/SR button is pressed under PAUSE or STEP, SLOW 1/2 is displayed and the speed of the reverse direction becomes slower. 3 Press FR/SR button again If FR/SR button is pressed again, SLOW 1/4 is displayed and the speed changes even slower. If pressed again SLOW 1/8 is displayed and it changes slower in conformity to the ratio. To return to normal play, Press PLAY button or FR/SR button under SLOW 1/8 state. The CLEAR button clears slow state at any speed of slow. SLOW 1/2 SLOW 1/4 SLOW 1/8 5. 10 Selecting Audio Languages (DVD, CVD, SVCD only) It is possible to change the audio soundtrack language to a different language from the one selected at the initial settings. This operation works only with discs on which multiple audio soundtrack languages are recorded. If the loaded disc supports multiple languages, you can see AUD indicator on FL display. If playing a CVD or SVCD, the AUD indicator is not turned on, even if it supports multiple languages. 1 Press AUDIO button during play If a disc does have multiple languages, the audio information is displayed as the figure shown below and the audio language is changed. If the loaded disc does not support multiple audio, the forbidden mark ( ) is displayed. Audio Change 2 Choosing desired audio language Pressing the AUDIO button continuously until the desired audio language is displayed. There are some DVD discs that prevent selecting languages even though the disc supports multiple languages. If this is the case, languages should be selected via the disc menu. 5. 11 Selecting Subtitles (DVD, CVD and SVCD only) It is possible to change the subtitle language to a different language from the one selected at the initial settings. This operation works only with discs on which multiple subtitle languages are 28 recorded. If the loaded disc supports multiple subtitles, you can see SUB-T indicator on FL display. [. . . ] You can move to the value position by pressing RIGHT arrow button. If you press SELECT button, password change window appears as shown below. If it is the first time change then there is no old password. Re-enter new password for confirm then press SELECT button. [. . . ]