User manual VIETA DVD-30

[. . . ] HOME CINEMA DVD 30 DVD Player User manual Content Introduction Safety Precautions . . 08 Front Panel and Rear Panel Illustration . . 10 Connections Connecting to a TV set . . 11 Connecting to an AV Receiver with 2 Channel Analog Audio Input . [. . . ] [AUTO] - Select if you are using AUTO signal system to match your TV set. 17 Advanced Features Modes and Features Setup Select [Video Output], and press ENTER or the [Video Out] submenu: to display A. Press SETUP to exit the Setup Menu [S-Video] - Select if you connected the DVD player to your TV using the composite Video output. [YUV] - Select if you connected the DVD player to your TV using the YUV output. [RGB] - Select if you connected the DVD player to your TV using the RGB output. Note: The Composite video and S-video output is always available. Press to change your selection Audio Setup The Audio menu allows you to set the analog and digital audio outputs to correspond with the external components you have connected to the player. For example, if you connected the player to a TV using the Stereo Audio jacks, you should set 2 channel to Enjoy downmixed stereo audio. You can set the audio format for each of the following sources: MP3, CD and others. DVD playback must be stopped in order to adjust the Audio setup. Set Digital Out to: PCM (default) To output 2 channel digital from the optical/coaxial digital audio outputs; e. g. , to a Minidisc recorder. RAW To output the raw 5. 1 channel digital bitstream form th optical/coaxial digital audio outputs; e. g. , to an external amplifier with a Dolby Digital decoder. PCM stands for Pulse Code Modulation, and is the standard 2-channel stereo format used for audio Cds. 18 Advanced Features Modes and Features Setup Rating Setup The Rating menu allows you to block playback of DVDs based on their ratings. Setting the Password & Rating Level The DVD player allows you to block playback of inappropriate content with a passwordprotected Rating system (not all discs are rated). Select Rating and press ENTER repeatedly to set the rating from 1 (most restrictive) to 8( least restrictive). If a password has already been set, the lock icon will be closed. You will not be able to select Rating until you SELECT the correct password using the 0-9 keys. Use the 0-9 keys to SELECT a 4-digit password and press ENTER. The lock icon will close to indicate that the rating and password are set. Press SETUP to save and exit. 1:Kid Safe 2:G 3:PG 4:PG-13 5:PG-R 6:R 7:NC-17 8:Adult Not all DVDs are rated. DVDs that are rated higher than the level you select will not play without SELECTING the correct password. If you forget your Rating password, select 8888 to clear the memory. Keep this password out of reach of children as if will always unlock the Parental Control setting. 19 Advanced Features Remote Control Operation STANDBY During playback, press STANDBY to stop the player and return to standby mode. While the player is in standby, press STANDBY or any key on the front panel to resume normal operation. OPEN/CLOSE To open the disc tray, press OPEN/CLOSE. [. . . ] Ensure the disc format is compatible with the player. Please check whether you have tried to play a software CD. REMOTE NOT WORKING Ensure the remote batteries are working. Point the remote control directly at the player's IR sensor. [. . . ]