User manual VIETA DVD-40

[. . . ] HOME CINEMA DVD 40 DVD Player User Manual Content Introduction Safety Precautions . . 08 Front Panel and Rear Panel Illustration . . 10 Connections Connecting to a TV set . . 11 Connecting to an AV Receiver with 5. 1 Channel Analog Audio Input . [. . . ] [AUTO] - Select if you are using AUTO signal system to match your TV set. 17 Advanced Features Modes and Features Setup Select [Video Output], and press ENTER or the [Video Out] submenu: to display A. Press SETUP to exit the Setup Menu [S-Video] - Select if you connected the DVD player to your TV using the composite Video output. [YUV] - Select if you connected the DVD player to your TV using the YUV output. [Y Pb Pr] - Select if you connected the DVD player to your TV using progressive scan. Note: The Composite video and S-video output is always available. Press to change your selection Audio Setup The Audio menu allows you to set the analog audio outputs to correspond with the external components you have connected to the player. For example, if you connected the player to a TV using the Stereo Audio jacks, you should set front speaker to PRESENT and other speaker to NONE to enjoy down mixed stereo audio. ON OFF A. Press SETUP to exit the Setup Menu Bass Management: you can select Bass redirection or not. present large small present large small none present none present large small none A. Press SETUP to exit the Setup Menu You can change the status of these speakers by select these items. 18 Advanced Features Modes and Features Setup More Audio Setup The More Audio menu includes Pro Logic and Subwoofer settings. Pro Logic Setting The DVD player has a built-in Dolby Pro Logic decoder to provide virtual surround sound for PCM (stereo) source material from the 5. 1 channel analog audio outputs. Select the desired Pro Logic setting and press ENTER: Auto Stereo audio soundtracks will be output in Dolby Pro Logic mode. On All audio soundtracks will be output in Dolby Pro Logic mode. Off (default) Dolby Pro Logic decoding will always be inactive. Press SETUP to save and exit. RAW PCM Off Auto On Off 19 Advanced Features Modes and Features Setup Rating Setup The Rating menu allows you to block playback of DVDs based on their ratings. 1:Kid Safe 2:G 3:PG 4:PG-13 5:PG-R 6:R 7:NC-17 8:Adult Setting the Password & Rating Level The DVD player allows you to block playback of inappropriate content with a passwordprotected Rating system (not all discs are rated). Select Rating and press ENTER repeatedly to set the rating from 1 (most restrictive) to 8( least restrictive). If a password has already been set, the lock icon will be closed. You will not be able to select Rating until you SELECT the correct password using the 0-9 keys. Use the 0-9 keys to SELECT a 4-digit password and press ENTER. The lock icon will close to indicate that the rating and password are set. Press SETUP to save and exit. 20 Advanced Features Modes and Features Setup Setting DivX-MPEG4 registration Not all DVDs are rated. DVDs that are rated higher than the level you select will not play without SELECTING the correct password. If you forget your Rating password, select 8888 to clear the memory. [. . . ] Ensure the disc format is compatible with the player. Please check whether you have tried to play a software CD. REMOTE NOT WORKING Ensure the remote batteries are working. Point the remote control directly at the player's IR sensor. [. . . ]