User manual VIETA HIP200

[. . . ] Warning: This digital video disc player employs a laser system. Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation Exposure. Warning: To prevent direct exposure to laser beam, do not open the enclosure. Visible laser radiation when open. Warning: Never stare directly into the laser beam. [. . . ] Use the buttons to move through the zoomed picture. To resume normal playback, press ZOOM button until screen becomes 1X. N Note:Zoom may not work on some DVDs. Special DVD Features Checking the contents of DVD discs: Menus DVDs may offer menus that allow you to access special features. Input the corresponding number or use the buttons to highlight your selection. Then press ENTER. 7 Basic operation Audio CD and MP3/WMA Disc Features Disc The DVD player can play CD and MP3/WMA formatted recordings on CD-R, CD-RW, DVD+R and DVD+RW discs. Audio CD Once an Audio CD is inserted it will be played automatically . Its playblack information will be show on screen, such as chapter elapse time. File names should have a maximum of 8 letters and must incorporate an" . mp3" or " . wma" extension. They should not contain special letters such as "/?The total number of files on one disc should be less than 650. This DVD player requires discs and recordings tomeet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats(including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback. Press REPEAT to select a desired repeat mode. Track: repeats the current track. (CD) Folder: repeats the current folder. All: repeats all the tracks on a disc. (CD) Off(No display): normal playback. N Note: If you press SKIP ( )once during Repeat Track playback, the repeat playback cancels. Repeat A-B CD 1. To repeat a sequence during disc playback press A-B at your chosen starting point. The Repeat icon"A"appear on the menu screen. 2. Press A-B again at your chosen end point. The Repeat icon "AB" appear on the menu screen, and the sequence begins to play repeatedly. 3. To exit the sequence and return to normal play, press A-B again. The Repeat icon disappears from the menu screen. N NOTE: Press" " to move to the next page , " folder, and " MENU" return to menu. 2, Used " " to enlarge, or " " to return to previons " to shorten the picture. 9 Basic operation Playing a JPEG Disc To rotate picture Press or during showing a picture to rotate the picture invert , mirror, clockwise , counter clockwise. To listen to MP3/WMA music watching picture JPEG You can display files while listering to MP3/WMA music files recorded on the same disc. JPEG disc compatibility with this player is limited as follows: 1. Depending upon the size and number of JPEG files, it could take a long time for the DVD player to read the disc¡ contents. If you ¯s don¡ see an on screen display after several minutes, some of the ¯t files may be too large reduce the resolution of the JPEG files to less than 2M pixels as 2760 x 2048 pixels and burn another disc. [. . . ] To disable Parental controls and have all Discs play, choose 'Off'. Helpful Hint: - Some DVDs are not encoded with a rating though the movie rating may be printed on the Disc cover. The rating level feature does not work for such Discs. PAL ENG ENG ENG WEST RESET LOAD FACTORY SETTING 1. Press to highlight 'Default ' . - When this function is activated, all settings will be reset to factory defaults. 18 SETUP Menu Setting Password Setup Page Password Setup Page - Password mode: Set password mode on/off. [. . . ]