User manual VIETA IP2B DATASHEET

[. . . ] The purchase invoice must accompany the product. This warranty DOES NOT COVER: · · · · · · · Damage caused by accidents, incorrect use, or abuse. Damage caused by external elements or natural disasters. Damage caused by product manipulation at the hands of personnel not authorized by VIETA AUDIO S. A. Damage subsequently produced in other components. [. . . ] · If you select the "ALL" in the VR mode, all recording files in A/B/C/D will be deleted. 3 Select the "ALL" using the REW/FF button and press the MENU button. · To cancel the file deletion, press the REC/STOP button or select the "ALL NO". Note: · Once the music/voice file is deleted, it cannot be resaved permanently. 18 Deleting all files in the player 1 Press the MENU button, select the Erase using REW/FF button and press the MENU button. 2 Select the "FORMAT" using the REW/FF button and press the MENU button. · The Erasing all files menu will appear. 3 Select the "FORMAT YES" using the REW/FF button and press the MENU button to delete all files. · All saved files will be deleted. · To cancel file deletion, press the REC/STOP button or select the "ERASE NO". Notice: · If you select the "FORMAT", all voice and music files as well as the data files downloaded from the PC will be deleted permanently. Check again before formatting. 19 Setting the Intro scan Press the PLAY/STOP button longer than 2 seconds while playing back MP3 or VR files. · Starting from the current file, the intro section of all files will be played back for 7 seconds, and the mode will be released and the initial state will be resumed. 20 Setting menu (when the MP3 is selected) 1 Press the PLAY/STOP button to turn on the power and select the MP3 mode. 2 After pressing the MENU button in the Playback or Stop mode, move to the intended function using the REW/FF button. · You can select all functions in the Playback mode. The mode will be selected by the order of EQ Mode REPEAT LCD light DISPLAY RESUME ERASE FREE MEMORY when you pull toward the "FF" button. 3 Press the MENU button gain to select the function. · Save other broadcasting frequency using the same method as described above. 32 To set and save the station automatically Only the identifiable frequency will beset in the area that receives weak frequency. 1 Press the MENU button. · The player will enter the Radio mode. 2 Press the MENU button again to select the "AUTO SAVE MODE" using the REW/FF button and press the MENU button. · Radio broadcasting frequencies that can be received will be scanned automatically and saved in the CH01 ~ CH20. 33 Listening to radio with saved frequency 1 Press the MENU button. · The player will enter the Radio mode. 2 Press the MENU button again to select the "PRESET MODE " using the REW/FF button and press the MENU button. · The manual frequency channel setting mode will be selected 3 Pull the REW/FF button shortly and find the saved channel. · If you pull the REW/FF button for a long time in the PRESET mode, you can search the broadcasting frequency manually since the mode is changed to the "FREQUENCY MODE". Note: · When you listen FM Radio using built-in speaker, the supported antenna must be plugged in on era phone terminal (phone) in the set. · If the supported antenna or ear phone is not plugged in on the set when listing FM Radio, some noise may be seriously affected. 34 Deleting saved frequency Deleting one Frequency channel 1 Press the MENU Button and press the MENU button again to select the "CH_ERASE MODE" using the REW/FF button. · The "CH ERASE MODE" will be selected. 2 Pull the REW/FF button shortly and find the saved preset channels. · The deleted preset channel will be selected. 3 Select the "Preset YES" using the REW/TT button and press the MENU button. · If you pull the REW/FF button for a long time in the PRESET mode, you can search the broadcasting frequency manually since the mode is changed to the "FREQUENCY MODE". 35 Recording while listening to FM radio 1 Press the REC/STOP button. 2 The red lamp will flash and the saved folder and number will be displayed. · If you press the Folder button before recording, the recording folder will be selected and saved in the file next to the recorded file. To finish recording Press the REC/STOP button again. · The red lamp will be off and the recording will be stopped. [. . . ] · To rename the file, click the right mouse button and input new name. 3. Select the player folder. Note: · If you execute the program when the USB cable is not connected, the error message as shown at right side will appear. In this case, click check and connect the USB cable. 48 Downloading file 1. The selected file will be downloaded to the player Note: ·Do not disconnect the USB cable from PC while upload or download process is running. [. . . ]