User manual VIETA VPC550R

[. . . ] CONTENTS Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 DIN Front-Mount (Method A). . . . . . . . . . . . . . . . . 3 Installing the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Removing the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] RESET FUNCTION Reset button (27) must be activated with either a ballpoint pen or thin metal object. The reset button is to be activated for the following reasons: SELECTING STATION button (5) and button (6) Press the shortly to activate automatic seek function. Press for several seconds until "MANUAL" appears on the display, the manual tuning mode is now selected. If both buttons have not been pressed for several seconds, it will return to seek tuning mode and "AUTO" appears on the display. AUTOMATIC MEMORY STORING & PROGRAM SCANNING - Automatic memory storing Press AS/PS (D-AUD) button (20) for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button. - Program scanning Press AS/PS (D-AUD) button (20) shortly to scan preset station. When the 11 OPERATION field strength level is stronger than the preset station, the radio is held at that preset number for several seconds, then searches again. STATION STORING Press any one of the preset buttons (11) (1 to 6) to select a station, which had been stored in the memory. Press this button for several seconds (until 2'nd beeps come out), now the current station is stored into the number button. RDS (RADIO DATA SYSTEM) OPERATION - Setting RDS mode Press AF button (21) and release immediately to switch on or off RDS mode. Whenever RDS is switch on, symbol "AF" appears on the display. Program name is displayed on receiving a RDS station. "AF" starts blinking if the broadcasting signal getting worse. "ALARM" will be displayed when an emergency broadcasting is received, meanwhile sound output level will be adjusted to the preset output level automatically when the volume control is set at minimum. - Regional Program Operation Press AF button (21) for several seconds to switch on or off region mode. Some broadcasting stations change their program from normal broadcasting to regional broadcasting for a certain time period. When region is on, the current listening program remains unchanged. When region is off, it allows the reception moves to the regional station. - Using PTY to Select Program PTY button (17) is operated as follows: While selecting PTY engagement, its selection is implemented by preset buttons as described in notes. When PTY is selected, the radio starts to search corresponding PTY information, and stops if the corresponding PTY information is detected. If corresponding PTY information is not existed any more, PTY engaging is automatically exit to normal mode. [. . . ] (see *1) *1: To have more reliable play back, please see following recommendations: a: Use CD-RWs with speed 1x to 4x and write with speed 1x to 2x. Use CD-Rs with speed 1x to 8x and write with speed 1x to 2x. Do not play a CD-RW which has been written for more than 5 times. Notes on MP3 files (MP3 Version Only): 1. [. . . ]