User manual VIEWCAST OSPREY 450E AV OPTION INSTALLATION

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual VIEWCAST OSPREY 450E AV OPTION. We hope that this VIEWCAST OSPREY 450E AV OPTION user guide will be useful to you.

Lastmanuals help download the user guide VIEWCAST OSPREY 450E AV OPTION.

Mode d'emploi VIEWCAST OSPREY 450E AV OPTION

Download

Manual abstract: user guide VIEWCAST OSPREY 450E AV OPTIONINSTALLATION

Detailed instructions for use are in the User's Guide.

 [. . . ] ViewCast provides the following cable/panel options for the A/V option:

95-00459 Osprey 450e A/V Option 95-00460 Osprey 450e/440 Breakout Panel 95-00462 Osprey 450e Balanced Audio Panel 95-00463 Osprey 450e Component Video Panel

This guide lists the steps for installing an A/V option board to the Osprey 450e video capture card. This installation requires the following actions:

Connect the A/V option board. Configure the additional video and balanced audio inputs. 

NOTE: A grounding strap should be used when performing these actions. 

A/V Option Kit Contents
Figure 1.  [. . . ] Align this arrow to Audio pin 1 on the A/V option board. Connect the ribbon cable by pressing down firmly. NOTE: Make sure the ribbons do not cross. 

Figure 7. Complete Assembly

NOTE: The recommended procedure is to install the driver software prior to installing the Osprey video capture card in the computer. As soon as you install an Osprey card in the PC,  the card and its drivers are detected automatically. Install the driver and follow the prompted instructions. 

ViewCast

7

Osprey 450e A/V Option Installation Guide

9. 

Turn off the computer and install the Osprey 450e and the A/V Option Card. WARNING!: Be sure to install the card in the PCI Express slot. Placing the card in the wrong slot can damage the card. 

Figure 8. The OS will detect the newly present Osprey card,  and begin to activate the driver. When the installation is complete,  reboot the system. 

ViewCast

8

Osprey 450e A/V Option Installation Guide

Configuring the additional A/V inputs
The Osprey 450e has four independent channels which are denoted by A,  B,  C,  and D. Each channel can support up to four composite inputs,  a component input,  and a Y/C input. With the addition of the A/V option and component panel,  the Osprey AVStream Driver enables you to select any of these as physical inputs to each channel. As an example,  the driver lists Osprey 450 Device 1A,  1B,  1C and 1D. The number "1" indicates the first physical Osprey 450e card in a system. A second card is listed as Osprey 450 Device 2A,  2B,  and so on. Property Page

To configure the A/V inputs: 1.  [. . . ] 95-00460 Osprey 450e/440 Breakout Panel

The Osprey 450e/440 breakout panel extends the connector on the Osprey 440 or 450e video capture card to the panel. This includes the 4 composite video connectors (BNC) and the 4 pairs of unbalanced stereo audio (RCA) from the breakout cable. 

ViewCast

11

viewcast. com

© 2010 ViewCast Corporation. ViewCast ,  Niagara (and design) are registered trademarks of ViewCast Corporation or its subsidiaries.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE VIEWCAST OSPREY 450E AV OPTION

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual VIEWCAST OSPREY 450E AV OPTION will begin.