User manual VIEWSONIC CD4636

[. . . ] ViewSonic CD4636 LCD Commercial Display TM - User Guide - Guide de l'utilisateur - Guía del usuario - Bedienungsanleitung - Py - Model No. : VS13512 Compliance Information For U. S. A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] (INPUT COMPONENT, S-VIDEO, VIDEO only) Selecting "DYNAMIC" will make the screen display panoramic with the expansion of the middle and outside of the screen changed. (The upper and the bottom of the image will be cut by expansion. ) Dynamic image is the same as FULL size image when HDTV signal is input. Selecting "REAL" image will be displayed 1 by 1 pixel. ViewSonic CD4636 23 CUSTOM ZOOM "CUSTOM ZOOM" will be selected when you select "CUSTOM" on the screen "ZOOM" mode. ZOOM: expands the horizontal and the vertical size simultaneously. HZOOM: expands the horizontal size only. H POSITION: moves to the right with + button. moves down with ­ button. SCREEN RESET Selecting Screen reset allows you to reset all OSD settings from PICTURE setting. Select "Yes" and press "ENTER" button to restore the factory preset data. Press "EXIT" button to cancel and then return to the previous menu. ViewSonic CD4636 24 Main-Menu AUDIO BALANCE Adjusts the balance of L/R volume. Press button to move the stereo sound image to right. Press button to move the stereo sound image to left. TREBLE This feature helps you to accentuate or reduce the high frequency sound. Press button to decrease TREBLE sound. BASS This feature helps you to accentuate or reduce the low frequency sound. Press button to decrease BASS sound. SPEAKER This feature helps you to cut the internal or the external loudspeaker. Press or button to exchanges the internal and the external loudspeaker. AUDIO RESET Selecting Audio reset allows you to reset all OSD settings from AUDIO setting. Select "YES" and press "ENTER" button to restore the factory preset. Press "EXIT" button to cancel and then return to the previous menu. ViewSonic CD4636 25 Main-Menu PIP (PICTURE IN PICTURE) PIP SIZE Selecting the size of picture inserted at the "Picture-in-Picture" (PIP) mode. "Large", "Middle" and "Small" are available. PIP AUDIO Selecting the sound source in PIP mode. When selecting "MAIN AUDIO", you will get the sound for the main picture and when selecting "PIP AUDIO", you will get the sound for the picture instead. PIP RESET Selecting PIP Reset allows you to reset all OSD settings from PIP setting. Select "Yes" and press "ENTER" button to restore the factory preset data. Press "EXIT" button to cancel and then return to the previous menu. ViewSonic CD4636 26 Main-Menu CONFIGURATION 1 AUTO ADJUST * : INPUT VGA only Press "ENTER" button to automatically adjust screen size, horizontal position, vertical position, clock, clock phase, white level and black level. Press " EXIT " button to cancel execution AUTO ADJUST and then will return to the previous menu. POWER SAVE Selecting RGB "ON", the monitor will go to power management mode when HDMI, DVI-D, VGA, sync is lost. Selecting VIDEO "ON", the monitor will go to power management mode after about 10 minutes delay from when COMPONENT and VIDEO input signal is lost. LANGUAGE OSD control menus are available in nine languages. [. . . ] Round trip transportation costs for in-warranty products will be paid by ViewSonic. Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages. [. . . ]