User manual VIEWSONIC DPX702 QUICK START GUIDE

[. . . ] If still not clean, see "Cleaning the Display" in this guide for further instructions. Install the unit in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] Lead-based alloys containing 85% by weight or more lead). 35% lead by weight, aluminium containing up to 0. 4% lead by weight and as a cooper alloy containing up to 4% lead by weight. Check your Digital Photo Frame package for the following items. Replacing front panel* * The bundled front panel varies depending on the model you purchase. If your Digital Photo Frame package contains a spare front panel, follow these instructions to replace the front panel for personal preference. Locate the indent on the edge near the memory card socket. Follow the direction of the figure and gently lift the front panel. Align the head of the stand with the socket, then rotate clockwise until the stand locks into place. Plug the power adapter from the device to a power outlet. Locatecontrolkeys(inthebackpanel) Locate the control buttons in the back panel according to the following table. Button OK Left Right Up Down Function Enter or confirm the selection Move to the previous or left selection Move to the next or right selection Move upward Move downward Power On/Off Press turn on the device, then the main screens appear. Hold for 2 seconds then release to turn off the device. Tips: f you can't turn on the device normally, please try to turn off the device I then turn it on again. The power LED lights blue during recharging, and turns off when the charge is complete. Allows you to select the language you need. Go to SETTINGS>Default, then select Yes to retore to the factory default setting or No to discard the selection. Allows you to turn on/off the key control sound. displays the software version and the current memory size. You will see Lowbatterypleaseplug-inthepoweradapter on the screen when the batterty is low. Plug the power adapter immediately, or the device will be turned off soon. From the main screen, press the Up and Down navigation keys to select PHOTO, then select the photo source you want to display. [. . . ] In Thumnail mode, select one photo, then press the Down navigation key . the selected photo is labeled with a "+" mark. Repeat step 1 to other photos you want to copy to a source. (Support up to 1024x1024 pixels) The system allows you to display 4000 photos at most from your own memory card or USB flash disk. [. . . ]