User manual VIEWSONIC EP5502

[. . . ] ViewSonic EP5502 Multimedia Digital Poster ® - User Guide Model No. : VS13955 Compliance Information For U. S. A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] Do not change any default setting when unnecessary. Copy all media files under the root directory in memory card, and delete the files that are not used to play. Keep the product far away from water when installing and configuring. Notes for CF card: before inserting CF card turn off the power, aligning the contact pins, do not insert with over strength, otherwise it will bend the pins and may burn off the decoder board or driver board. · 1. 2 System description Adopting signal-chip 1080P solution combined with decoder and driver, the system is stable and reliable with long time work. It supports to read, decode and play AV files from flash disk and other memory cards. This device has the function of multi ad player and monitor. · 1. 3 Attention about CF, SD, USB usage 1. SD and CF card can't be used at the same time. When there is CF card in the machine, the media files will be imported from flash disk to the CF card automatically if plugged in flash disk. Read the media file in flash disk if there is no CF or SD card. CF card is the best choice if playing video file. The video file code rate should be below 20M bit rate. CF card is recommended for playing HD program. Auto copy function: Import the media file from flash disk to memory card automatically. Auto play system: users can set up time to switch input signal from different ports andinternal storage. Timer on/off function. ViewSonic EP5502 2 4. Seamless play: no black screen when program is switched by following below requirements. 1) All of the media files should be the same format, for example it can support suffix . TS/. 2) The resolution, codec, code rate, frame rate should be the same for all video files, and the audio coder, sample rate should be the same for all audio files. Note: If high-definition (HD) playing combines with standard definition (SD) video file, it should be followed as below: 1) Use video converter (like Ulead Video Studio) to convert the SD and HD video files to be one HD video program. 2) Use video converter (like Ulead Video Studio) to convert the resolution, codec and frame rate of SD file to be the same as the HD video file. [. . . ] Any damage of the product due to shipment. Causes external to the product, such as electrical power fluctuations or failure. Use of supplies or parts not meeting ViewSonic's specifications. Any other cause which does not relate to a product defect. [. . . ]