User manual VIEWSONIC N1630W

[. . . ] ViewSonic N1630w LCD TV ® - User Guide - Guide de l'utilisateur - Guía del usuario IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www. viewsonic. com in English, or in specific languages using the Regional selection box in the upper right corner of our website. "Before operating the equipment, read the instructions in this manual carefully. " ViewSonic ® Model No. : VS12114-1M Product Registration To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www. viewsonic. com. For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: [ ] N1630w ViewSonic LCD TV [ ] VS12114-1M N1630w-1M_UG_ENG Rev. [. . . ] Channel up when source is TV, or select a control while in OSD menu. Select input source. Remote Control Receiver Receives IR signals from the remote control. Volume Down Volume Up MENU CH Down CH Up INPUT Contact ViewSonic service team at: http://www. ViewSonic. com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775 ViewSonic 14 N1630w Getting Started Rear View of the Product Item 1 2 3 Power (AC input) HDMI Input Terminal VGA signal input Description Plug-in the supplied AC Power cord and connect to the AC input power source. Connect this port to the HDMI/HDMI-DVI jack of the compatible equipment. Connect a 15-pin D-sub RGB cable to the RGB output of your computer and the other end to the RGB input on the rear of the LCD TV. Connect this jack to the YPbPr output of A/V device. 4 5 6 YPbPr signal input Composite Video input Connect this jack to the composite video output connectors on your A/V equipment. Headphone Jack Connect to your headphones. By connecting the headphones, you can listen to the sound from the TV on headphones. If you connect the headphones, the TV speakers will be muted. Connect this jack to your Cable or VHF/UHF antenna. Connect the S-Video cable from the compatible device to this connector on the rear panel of the LCD TV. Connect the Audio in cable for AV/ S-Video from this jack to the corresponding connectors on your A/V device. Connect the Audio in cable for YPbPr/ HDMI-DVI from this jack to the corresponding connectors on your A/V device. 7 8 9 TV Input Jack S-Video input AV/ S-Video signal Audio input (left/ right) 10 YPbPr/ DVI signal Audio input (left/ right) Contact ViewSonic service team at: http://www. ViewSonic. com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775 ViewSonic 15 N1630w ENGLISH Getting Started Item 11 PC Audio input Description Connect the RGB Audio Out on your computer to the RGB Audio on the rear of the LCD TV. ENGLISH AV connection Connect the composite video and audio input jacks to the corresponding output jacks of your A/V device. --- VIDEO: Composite Video input [5] --- AUDIO: AV/ S-Video signal Audio input [9] S-Video connection Connect the S-Video and audio input jacks to the corresponding output jacks of your VCR or other video device that has S-Video. S-Video provides better picture quality than composite video connection. If both are connected, S-Video signal has priority. --- VIDEO: S-Video input [8] --- AUDIO: AV/ S-Video signal Audio input [9] Component (YPbPr) connection YPbPr provides better picture quality than the S-Video or the AV connection. For YPbPr connection, connect the component video (YPbPr) and audio jacks to the corresponding output jacks of your A/V device. --- VIDEO: YPbPr signal input [4] --- AUDIO: YPbPr signal audio input [10] HDMI connection HDMI (High-Definition Multimedia Interface) is a licensable audio/video connector interface for transmitting uncompressed, encrypted digital streams between this TV and any HDMIequipped audio/video equipment. Be sure to use only an HDMI cable that bears the HDMI logo. If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI Input Terminal (with DVI-to-HDMI cable or adapter), and connect the Audio cable to the Audio In jacks. With HDMI cable: HDMI Input Terminal [2] 2. [. . . ] Who the warranty protects: This warranty is valid only for the first consumer purchaser. Any product on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from: a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, unauthorized attempted repair, or failure to follow instructions supplied with the product. [. . . ]