User manual VIEWSONIC N2000

[. . . ] N2000 LCD TV Display User Guide Full 20. 1" Diagonal Viewable Screen Contents Product Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 For Your Records. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Product Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Antenna Installation Instruction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Top Control keys and Front panel controls are shown in detail below Speaker Top Control keys Front Panel Control Key 1 Menu 2 Channel + / - Turn OSD Menu ON/OFF Channel up/down when source is at TV or select a control while in OSD Menu. 3 Volume + / Increase/Decrease sound volume or adjust a highlighted control while in OSD Menu. 4 OK Key Execute a command Toggle the input source from RGB >> Component >> AV >> 5 Sources S-Video >> TV 6 Power Button Power ON/OFF 7 Remote Control Receiver The Remote Control Receiver ViewSonic N2000 5 Rear View of the Product PC A. Audio In (PC) Using cable provided connecting to the Audio out (Green) on your PC B. RGB (VGA input) Using the 15-pin VGA cable provided connecting to the RGB out on your PC AV-1 C. S-Video input Connect the S-Video to external video device such as VCR, DVD and Video game D. Audio input (Right / Left) Connect the external audio to this jack; (Audio (R/L) inputs are supporting either S-Video or AV input. ) E. AV Video input Connect the Composite Video (Yellow) to external video device such as VCR, DVD and Video game AV-2 F. Component (Y Pb/Cb Pr/Cr) input Connect the external video devices with component output to these jacks G. Audio input (Right / Left) Connect the external audio to this jack TV H. TV input Connect to the antenna or cable service AC IN I. AC IN (Power) Using cable provide connect to a power source ViewSonic N2000 6 Remote Controls The Remote Control is compatible with the display from up to 5m distances. MUTE Switch the power On/Off Turn the Sound On/Off 2. CHANNEL NUMBER KEY Select input sources between RGB >> Set the channel Component >> AV >> S-Video >> TV 24. TV Display the source and channel information Source selected to TV mode 25. ASPECT Freeze the screen Select Video display Ratio 5. Connect power cables Connect the power cord to the N2000 LCDTV then to a properly grounded AC outlet. 5. Turn Power On Press the AC switch button to "I", then press the Power ON button on the front of the LCDTV display. Or press the Power On (Blue) button on the remote control. 6. Select input source for your LCDTV display, via either OSD menu or remote control 1) Insert the ViewSonic Wizard CD to your computer CD driver, wait for the CD to auto-start and then follow the on-screen instruction. 2) For the best picture quality set your LCD TV display timing mode to VESA 640x480 at 60Hz, refer to the graphic card's user guide, for questions on how to set this timing mode. ViewSonic N2000 10 OSD Functions All the function settings for your LCDTV display are controlled either via the remote control or using the top control keys on the front panel. To display the OSD main menu, press Menu button on the front control keys or the MENU/EXIT key on the remote control. [. . . ] For units which are mounted on a desk or table, type SVT or SJT cord sets may be used. For units which sit on the floor, only SJT type cord sets may be used. The cord set must be selected according to the current rating for your unit. Please consult the table below for the selection criteria for power cords used in the United States and Canada. [. . . ]