User manual VIEWSONIC NEXTVISION N4

[. . . ] NextVisionTM N4 Video Processor User Guide Contents Getting Started Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 The Remote Control Activate the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 To change the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Push the tip of a ballpoint pen into the small pin hole on the back of the remote control as shown below and pull the cover off. Place the 3 V Lithium battery in the battery compartment. Pin hole Back cover Lithium battery 4 ViewSonic NextVision N4 Using the Remote Control PC/TV Switches between your PC and TV Power Turns the N4 ON/ OFF INPUT Selects input sources like PC, TV, AV, Svideo CH TV Channel up or down MUTE Turns the sound ON/OFF VOL Volume up or down Numeric 10-key pad DISPLAY TV channel (Input source) SEL Select a TV channel Directional arrows scroll through menu options or adjust a selected option. CH Scan Press Channel Scan once. A screen appears asking you to press CH Scan again It then automatically scans TV or CATV channels and saves scanned programs. Res A shortcut that switches between four screen resolutions. ENTER The highlighted OSD (On-Screen Display) or menu. Recall Return to the previous channel in TV Mode. (Toggles between two TV channels. ) ViewSonic NextVision N4 5 The Video Processor Front View Power indicator and IR (infrared) receiver. IMPORTANT: Point the remote control to this part of the N4. Headphone jack POWER Turns the unit on or off. Power can also be turned on or off from the remote control. CH+ Selects the next higher channel CHSelects the next lower channel VOL+ Increases the volume VOLDecreases the volume INPUT Press INPUT to switch signals from PC, TV, AV, S-Video 6 ViewSonic NextVision N4 Back View DC IN Connect to a 12V power supply RGB INPUT Using the 15-pin VGA cable provided, connect one side to the VGA output on your PC and the other side to the RGB INPUT of your N4. RGB OUTPUT Connect your 15-pin monitor connector to the RGB OUTPUT. S-VIDEO INPUT Connect the external S-Video to the S-VIDEO INPUT port. RF IN (VHF/UHF) Connect to antenna or cable TV signal. VIDEO IN Connect the external video from a DVD, VCR, CD, IRD, camera, or video game. AUDIO IN R-L Connect the external AUDIO IN to the N4. AUDIO IN Connect the audio cable from your PC sound card to the AUDIO IN port on the N4. AUDIO OUT Connect the AUDIO OUT to your PC speakers. ViewSonic NextVision N4 7 Setup Cable or antenna **S-VIDEO cable *RCA A/V cable Adapter DVD/VCR/ LD/IRD Game console * For an Audio/Video connection, use the RCA audio (L + R) connectors. **For a video connection, use an RCA video connector or an S-Video connector. 8 ViewSonic NextVision N4 Main Menu Press the MENU button on the remote control for the MAIN MENU shown below. Press the up or down arrow to highlight a menu option. The selected sub-menu option appears. The command line at the bottom of each menu tells you what to do next. Example, to exit the MAIN MENU, press the MENU button on the remote control. MENU button ViewSonic NextVision N4 9 Picture Menu Press the up or down arrow to scroll up or down the menu. With an option highlighted, press the ENTER button. To adjust the selected option, press the left or right button . To return to the MAIN MENU and save your adjustments, press MENU. Audio Menu(s) Press the up or down arrow to scroll up or down the menu. With an option highlighted, press the ENTER button. [. . . ] Damage, deterioration or malfunction resulting from: a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product. Repair or attempted repair by anyone not authorized by ViewSonic. Damage to or loss of any programs, data or removable storage media. [. . . ]