User manual VIEWSONIC PJ1165

[. . . ] PJ1165 User Guide Guide de l'utilisateur Bedienungsanleitung Guía del usuario Guida dell'utente Användarhandbok Käyttöopas Contents For Your Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Projector Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Part Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setting Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Adjusting The Projector's Elevator . . . . . . . . . . . . 7 Connecting Your Devices . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Connecting The Power Supply . . . . . . . . . . . . . . . . 11 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 About The Laser Pointer . . . . . . . . . . . . . . . . . . . . . . . . . 12 Putting Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Operating The Remote Control . . . . . . . . . . . . . . . 13 Using The Remote ID Feature . . . . . . . . . . . . . . . . 13 Using The Mouse/Keyboard Control Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Power On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Turning On The Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Turning Off The Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Operating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Selecting An Input Signal . . . . . . . . . . . . . . . . . . . . . . . . 16 Selecting The Aspect Ratio . . . . . . . . . . . . . . . . . . . . . 17 Using The Automatic Adjustment Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Adjusting The Picture Position . . . . . . . . . . . . . . . . 18 Correcting The Keystone Distortion . . . . . . . . 18 Adjusting The Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Muting The Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Temporarily Blanking The Screen . . . . . . . . . . . 19 Freezing The Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Using The Magnify Feature . . . . . . . . . . . . . . . . . . . . . 20 Displaying The Child Window . . . . . . . . . . . . . . . . . . 21 Selecting An Audio Input . . . . . . . . . . . . . . . . . . . . . . . . . 21 Multifunctional Settings . . . . . . . . . . . . . . . . . . . . . . . 22 Using The Menu Functions . . . . . . . . . . . . . . . . . . . . . 22 MAIN Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PICTURE-1 Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The message of the "AUTO IN PROGRESS" for the auto adjustment. The message of the "NO INPUT IS DETECTED" The message of the "SYNC IS OUT OF RANGE" The message of the "Searching. . . " The message of the "Detecting. . . " The indication of the input signal by input change. The indication of the aspect ratio by changing the aspect ratio. The indication of "FOCUS" by adjusting the focus. Select the EXECUTE using the button to reset the SCREEN menu items. : EXECUTE CANCEL The items of the SCREEN menu are collectively returned to the initial setting. RESET How to register your picture as the MyScreen MyScreen is pointed on the SCREEN menu. Press the button The MyScreen appears. Do you capture the picture from the current screen?If the ESC/RESET button NO: Press the ESC/RESET button YES: Press the ENTER button The picture freeze and the frame for capturing appears. Move the frame to the position of the picture which you want to use, using / / / buttons, and press the ENTER button to register. Registering. It takes about 1 minute to register. Just when the picture registration is completed the registered screen and the message of the right is displayed for a few seconds. If the picture registration failed, the message of the right is displayed for a few seconds. ViewSonic PJ1165 32 OPTION Menu With the OPTION menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item VOLUME SPEAKER Adjust the volume using the High Low Description / buttons. : Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF When the TURN ON is selected, the built-in speaker works. Select a remote sensor using the / button (1), then switch it using the ENTER button (2). : (1) FRONT TOP REAR (2) (Off) (On) memo A sensor cannot be turned off when the other two are off. Select a number as an ID number for remote control using the / buttons. : ALL 1 2 3 The projector is controlled by the remote control whose ID CHANGE switch is set into the position of the same number as this number. When the ALL is selected, the projector is controlled by a remote control irrespective of the position of the ID CHANGE switch. memo Please refer to the section "Using The Remote ID Feature". Pressing the RESET button for about 3 seconds displays the LAMP TIME menu. Select the RESET using button to reset the timer. : RESET CANCEL Selecting the RESET resets the count of the lamp timer to 0. memo Perform this function only when you have replaced the lamp. The lamp timer counts the used time of the current lamp, to display the messages about the lamp. Incorrect performing causes incorrect operation of the messages. memo About replacing the lamp, please refer to the section"Lamp". [. . . ] IMPORTANT: The wires in this mains lead are coloured in accordance with the following code: Green-and-Yellow: Earth Blue: Neutral Brown: Live If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW. The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED. IMPORTANT NOTICE CONCERNING POWER CORD SELECTION The power cord set for this unit has been enclosed and has been selected according to the country of destination and must be used to prevent electric shock. [. . . ]