User manual VIEWSONIC PJ400

[. . . ] PJ400 Portable LCD Projector Compliance Information For U. S. A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] See the item WHISPER of section SETUP menu. ( 34) MIRROR Using the buttons / switches the mode for mirror status. See the item MIRROR of section SETUP menu. ( 34) Performing this item resets all of the items of EASY MENU RESET except FILTER TIME and LANGUAGE. Pressing the button displays a dialog to make sure. To perform reset, point at RESET using the button . ( 24) FILTER TIME Performing this item resets the filter timer which counts use time of air filter. See the item FILTER TIME of section OPTION menu. ( 39) LANGUAGE Using the buttons / switches the language of menu. See the item LANGUAGE of section SCREEN menu. ( 35) Go To Pointing at the "Go To Advanced Menu" and pressing the button Advanced changes the EASY MENU into the Advanced MENU. ( 22) Menu Performs to use the menu of PICTURE, IMAGE, INPUT, SETUP, SCREEN or OPTION. ViewSonic PJ400 26 PICTURE menu With the PICTURE menu, items shown in the table below can be performed. Choose an item using the cursor buttons / on the projector or remote control, and press the cursor button on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. Item BRIGHT CONTRAST GAMMA Description Using the buttons / adjusts the brightness. Light Dark Using the buttons / adjusts the contrast. Strong Weak Using the buttons / switches the GAMMA mode. #1 DEFAULT #1 CUSTOM #2 DEFAULT #3 CUSTOM #3 DEFAULT #2 CUSTOM To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM Selecting a mode of CUSTOM and then pressing the button or the ENTER button displays a dialog to aid you in adjusting the mode. This function is useful when you want to change the brightness of particular tones. Choose an item using the buttons /, and adjust the level using the buttons /. Using a test pattern You can display a test pattern for checking the effect of your adjustment by pressing the ENTER button. Each time you press the ENTER button, the pattern changes as below. [. . . ] All accessory lamps purchased separately are warranted for 90 days. Who the warranty protects: This warranty is valid only for the first consumer purchaser. Any product on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from: Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product. [. . . ]