User manual VIEWSONIC PJ510

[. . . ] PJ510 User Guide Contents For Your Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Projector Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Please use this function with the maximum window size. At a VIDEO input or S-VIDEO input: · This function performs only when the AUTO is selected under the VIDEO item of the INPUT menu. For a COMPONENT VIDEO input, although this function is ineffective, the signal type is identified automatically even if the AUTO is not selected. For HDTV signals, refer to the HDTV item below. · This function automatically selects the optimum mode for the input signal. However, it may not work well at a PAL60 signal and some other signals. irregular picture, color lack), please use the function of VIDEO of the INPUT menu. · The operation of this function requires approximately 10 seconds. POWER OFF Set the Automatically Power Off Timer: Long (Max. 0 minute =DISABLE) · This function performs only when the time is set to 1 to 99. · When the set time passes without a valid signal (there is no signal, or the signal is out of specifications), the projector lamp automatically goes off, and the POWER indicator begins blinking. Please refer to the section "Turning OFF The Projector" of "Power ON/OFF" about the turning off. Automatically Signal Search: TURN ON ( ) ( ) TURN OFF · If the TURN ON is selected under this item when no signal input is detected, the projector begins searching for an input signal. When an input signal is detected the projector will cease searching and the picture will appear. · The priority of a search is as follows: SEARCH · If the projector is unstable to find an input signal at any of its ports, it will return to the state it was in prior to the search. RESET Reset the AUTO Menu Items: Selecting the EXECUTE performs this function. EXECUTE ( ) CANCEL · The items of the AUTO menu are collectively returned to the initial setting. Note that the item ADJUST is not reset. 27 ViewSonic PJ510 SCREEN Menu With the SCREEN menu, the items shown in the Table below can be performed. Perform each operation in accordance with the instructions in the table below. Item BLANK Description Select a Blank Screen Color: BLUE ( ) ( ) WHITE ( ) ( ) BLACK · The blank screen of selected color is displayed by pressing the BLANK button. Please refer to the section "Temporarily Blanking The Screen" of "Operation" about the screen blanking. Select the Start Up Screen: TURN ON ( ) ( ) TURN OFF · If the TURN OFF is selected when there is no signal or the detected signal is out of specifications, the blank screen is displayed. START UP MENU POSITION Adjust a Menu Position: Pressing the ( ) or ENTER button start adjusting, Up () Left ( ) ( ) Right () Down · The ( ) button does not finish this item. When you want to return to the previous display, please press the ESC button. MESSAGE Select the Message Mode: TURN ON ( ) ( ) TURN OFF · When the TURN OFF is selected, the following message functions are disabled: The message of "AUTO IN PROGRES" The message of "NO INPUT IS DETECTED" The message of "SYNC IS OUT OF RANGE" The message while being searched for an input signal, "Searching . . . . . " The message when an input signal is detected, "Detecting . . . . . " The indication of the input signal by input change. [. . . ] IMPORTANT: The wires in this mains lead are coloured in accordance with the following code: Green-and-Yellow: Earth Blue: Neutral Brown: Live If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW. The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED. IMPORTANT NOTICE CONCERNING POWER CORD SELECTION The power cord set for this unit has been enclosed and has been selected according to the country of destination and must be used to prevent electric shock. [. . . ]