User manual VIEWSONIC PJ658

[. . . ] ViewSonic PJ658 LCD Projector ® - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell'utente - Guia do usuário - Användarhandbok - Käyttöopas - - - - Model No. : VS11361 Compliance Information For U. S. A. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) The device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] Using the buttons / turns the frame lock function on/off. TURN ON TURN OFF · This item performs only at a RGB signal with vertical frequency of 50 to 60 Hz. · When the TURN ON is selected, a moving picture is displayed more smoothly. · This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF. Set the RGB input signal type for the RGB port. (1) Use the / buttons to select the RGB port to be set. RGB1 RGB2 (2) Use the / buttons to select the RGB input signal type. SYNC ON G ON SYNC ON G OFF · Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode allows reception of SYNC ON G. · In the SYNC ON G mode, the picture may be distorted with certain input signals. In such a case, remove the signal connector so that no signal is received and turn SYNC ON G off, and then reconnect the signal. COMPONENT VIDEO FORMAT FRAME LOCK RGB IN ViewSonic PJ658 33 INPUT Menu INPUT Menu (continued) Item Description The resolution for the RGB1 and RGB2 input signals can be set on this projector. (1) In the INPUT menu select RESOLUTION using the / buttons and press the button. (2) In the RESOLUTION menu select the resolution you wish to display using the / buttons. Selecting AUTO will set a resolution appropriate to the input signal. (3) Pressing the or Enter button when selecting a STANDARD resolution will automatically adjust the horizontal and vertical positions, clock phase and horizontal size and automatically select an aspect ratio. The INFORMATION dialog will be displayed. RESOLUTION MENU INFORMATION RGB1 1280x 768@ 60 RESOLUTION *2 (4) To set a custom resolution use the / buttons to select CUSTOM and the CUSTOM RESOLUTION BOX will be displayed. Set the horizontal (HORZ) and vertical (VERT) resolutions using the /// buttons. *1 (5) To save the setting place the cursor on the right-most digit and press the button. The horizontal and vertical positions, clock phase and horizontal size will be automatically adjusted and an aspect ratio will be automatically selected. After the INFORMATION dialog has displayed for about 10 seconds the screen will return to the RESOLUTION menu displaying the changed resolution. CUSTOM RESOLUTION BOX INFORMATION RGB1 992x 744@ 60 (6) To revert back to the previous resolution without saving changes place the cursor on the left-most digit and press the button. The screen will then return to the RESOLUTION menu displaying the previous resolution. *1 Not all resolutions are guaranteed. *2 For some pictures, this function may not work well. ViewSonic PJ658 34 SETUP Menu SETUP Menu With the SETUP menu, the items shown in the table below can be performed. [. . . ] Any damage of the product due to shipment. Causes external to the product, such as electric power fluctuations or failure. Use of supplies or parts not meeting ViewSonic's specifications. Any other cause which does not relate to a product defect. [. . . ]