User manual VIEWSONIC PJD5353

[. . . ] PJD5353 DLP Projector User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www. "Antes de operar su equipo lea cu idadosamente las instrucciones en este manual" Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] Highlight Timer Period and decide the timer period by pressing /. Important If the timer is already on, the timer will restart whenever the Timer Period is reset. Press to highlight Display Timer and choose if you want the timer to show up on the screen by pressing / . 3. Selection Always 1 Min/2 Min/3 Min Never 4. Press Description Displays the timer on screen throughout the presentation time. Displays the timer on screen in the last 1/2/3 minute(s). Hides the timer throughout the presentation time. to highlight Timer Position and set the timer position by pressing / . 5. Top-Left Bottom-Left Top-Right Bottom-Right Press to highlight Timer Counting Direction and select your desired counting direction by pressing / . Selection Count Up Count Down 6. 7. Description Increases from 0 to the preset time. Decrease from the preset time to 0. To activate the presentation timer, press to highlight Start Counting and press on the projector or Enter on the remote control. Highlight Yes and press on the projector or Enter on the remote control to confirm. EN-24 24 Menu Operation The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. EN-25 25 EN-26 26 How to operate 1. Press MENU on the projector or Menu on the remote control to open the OSD menu. When OSD is displayed, use / to select any feature in the main menu. After selecting the desired main menu item, press to enter sub-menu for feature setting. Use / to select the desired item and adjust the settings with /. Press MENU on the projector or Menu on the remote control, the screen will return to the main menu. To exit OSD, Press MENU on the projector or Menu on the remote control again. The OSD menu will close and the projector will automatically save the new settings. Picture Color Mode There are many factory presets optimized for various types of images. Brightest : For the brightest environment. ViewMatch : For accuracy color performance. User 1 : Memorize user 1 defined settings. User 2 : Memorize user 2 defined settings. White board : For white projection screen type. [. . . ] Replacement product or parts may include remanufactured or refurbished parts or components. Limited Three (3) year General Warranty Limited One (1) year Heavy Usage Warranty: purchase. manufacturer's installed lamp only. All accessory lamps purchased separately are warranted Who the warranty protects: What the warranty does not cover: 1. [. . . ]