User manual VIEWSONIC PJD5523W

[. . . ] PJD5133/PJD5233/PJD5523w DLP Projector User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www. "Antes de operar su equipo lea cu idadosamente las instrucciones en este manual" Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] 2. Focus the image by rotating the focus ring. A still image is recommended for focusing. Adjust the image size by rotating the zoom ring. 21 Adjusting Projection Image Size Refer to the graphic and table below to determine the screen size and projection distance. Maximum zoom Minimum zoom Screen Center of lens Vertical offset Projection distance PJD5133/PJD5233 Screen size Diagonal [inch (cm)] 30 (76) 60 (152) 80 (203) 100 (254) 150 (381) 200 (508) 250 (635) 300 (762) 4 : 3 Screen Projection distance [inch (m)] (min. zoom) 45. 3 (1. 2) 92. 2 (2. 3) 123. 5 (3. 1) 154. 8 (3. 9) 233. 0 (5. 9) 311. 2 (7. 9) 389. 4 (9. 9) 467. 6 (11. 9) (max. zoom) 50. 6 (1. 3) 102. 9 (2. 6) 137. 7 (3. 5) 172. 5 (4. 4) 259. 6 (6. 6) 346. 7 (8. 8) 433. 8 (11. 0) - Image height [inch (cm)] 18 (45. 72) 36 (91. 44) 48 (121. 92) 60 (152. 4) 90 (228. 6) 120 (304. 8) 150 (381. 0) 180 (457. 2) Vertical offset [inch (cm)] 2. 70 (6. 86) 5. 40 (13. 72) 7. 20 (18. 29) 9. 00 (22. 86) 13. 50 (34. 29) 18. 00 (45. 72) 22. 50 (57. 15) 27. 00 (68. 58) 22 PJD5523w Screen size Diagonal [inch (cm)] 45 (114) 60 (152) 80 (203) 100 (254) 150 (381) 200 (508) 250 (635) 300 (762) 16 : 10 Screen Projection distance [inch (m)] (min. zoom) 55. 4 (1. 4) 74. 5 (2. 0) 100. 0 (2. 5) 125. 5 (3. 2) 189. 2 (4. 8) 253. 0 (6. 4) 316. 7 (8. 0) 380. 4 (9. 7) (max. zoom) 69. 3 (1. 8) 92. 9 (2. 4) 124. 4 (3. 2) 155. 8 (4. 0) 234. 6 (6. 0) 313. 3 (8. 0) 392. 0 (10. 0) - Image height [inch (cm)] 23. 85 (60. 58) 31. 8 (80. 77) 42. 4 (107. 70) 53 (134. 62) 79. 5 (201. 93) 106 (269. 24) 132. 5 (336. 55) 159 (403. 86) Vertical offset [inch (cm)] 2. 96 (7. 51) 3. 94 (10. 02) 5. 26 (13. 35) 6. 57 (16. 69) 9. 86 (25. 04) 13. 14 (33. 39) 16. 43 (41. 73) 19. 72 (50. 08) Position the projector in a horizontal position; other positions can cause heat build-up and damage to the projector. Keep a space of 30 cm or more between the sides of the projector. Do not use the projector in a smoky environment. Smoke residue may buildup on critical parts and damage the projector or its performance Consult with your dealer for special installation such as suspending from a ceiling. 23 Locking control keys With the control keys on the projector locked, you can prevent your projector settings from being changed accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the projector will operate except Power. Important If you press Power to turn off the projector without disabling panel key lock, the projector will still be in locked status the next time it is turned on. 24 Setting the presentation timer The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Go to the Option > Presentation Timer menu and press on the projector or Enter on the remote control to display the Presentation Timer page. Highlight Timer Period and decide the timer period by pressing /. Important If the timer is already on, the timer will restart whenever the Timer Period is reset. Press to highlight Display Timer and choose if you want the timer to show up on the screen by pressing / . 3. Selection Always 1 Min/2 Min/3 Min Never 4. Press Description Displays the timer on screen throughout the presentation time. Displays the timer on screen in the last 1/2/3 minute(s). Hides the timer throughout the presentation time. to highlight Timer Position and set the timer position by pressing / . 5. Top-Left Bottom-Left Top-Right Bottom-Right Press to highlight Timer Counting Direction and select your desired counting direction by pressing / . Selection Count Up Count Down 6. 7. Description Increases from 0 to the preset time. [. . . ] Replacement product or parts may include remanufactured or refurbished parts or components. Limited Three (3) year General Warranty Limited One (1) year Heavy Usage Warranty: purchase. manufacturer's installed lamp only. All accessory lamps purchased separately are warranted Who the warranty protects: What the warranty does not cover: 1. [. . . ]