User manual VIEWSONIC PJD6241

[. . . ] ViewSonic PJD6241 DLP Projector ® - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell'utente - Guia do usuário - Användarhandbok - Käyttöopas - - () - () IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www. viewsonic. com in English, or in specific languages using the Regional selection box in the upper right corner of our website. "Antes de operar su equipo lea cuidadosamente las instrucciones en este manual" - - - Podrcznik uytkownika - Kullanc klavuzu Model No. : VS12476 Compliance Information FCC Statement This device complies with part 15 of FCC Rules. [. . . ] The IP Address is the number that identifies this projector on the network. You cannot have two devices with the same IP Address on the same network. The IP Address "0. 0. 0. 0" is prohibited. Subnet Mask A numeric value to define the number of bits used for a network address of a divided network (or subnet) in an IP Address. This function can only be used when DHCP is set to No. The Subnet Mask "0. 0. 0. 0" is prohibited. Gateway A server (or router) to communicate across networks (subnets) that are divided by Subnet Mask. This function can only be used when DHCP is set to No. MAC Address Abbreviation for Media Access Control Address. MAC Address is a unique ID number assigned to each network adapter. Network Restart Restart network function when the device is not working properly or to apply changes made on OSD configuration menu. Language (Computer / Video Mode) Select the language used by the on-screen menu. Factory Default (Computer / Video Mode) Restore settings to factory default . System Info (Computer / Video Mode) Source Display the current input source. Resolution Display current input source resolution. Frequency Display current image horizontal frequency. Frequency Display current image vertical frequency. EN-24 Network Control This feature provides the ability to remotely control and manage the projector through the network. Preparation: 1. Connect one end of the internet cable to the Network Control connector on the projector. Connect the other end of the internet cable to an available RJ-45 connector on your computer. Turn on your projector and computer. There are two ways to connect to the network control: A. Auto IP address setting (DHCP : Yes): 1. Enable DHCP from the projector OSD, under Network Config. When DHCP is enabled, IP Address, Subnet Mask and Gateway information will get from DHCP server automatically. EN-25 2. Start browser in PC and specify following URL, then click "Go" button. URL: http://(Projector IP address)/ For example, if projector IP address is 169. 254. 1. 1, specify URL: http:// 169. 254. 1. 1/ 3. If connection succeeds, the login screen is displayed. Enter your User name and Password and click "OK". [. . . ] Take or ship the product in the original container packaging to an authorized ViewSonic service center. Round trip transportation costs for in-warranty products will be paid by ViewSonic. Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. [. . . ]