User manual VIEWSONIC PJL3211

[. . . ] ViewSonic PJL3211 XGA LCD Projector ® - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell'utente - Guia do usuário - Användarhandbok - Käyttöopas - - () - () - Model No. : VS12417 Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] After the INFORMATION (41) dalog has dsplayed for about 10 seconds the screen wll return to the RESOLUTION menu dsplayng the changed resoluton. COMPUTER1 992x 744@ 60 COMPUTER 1 1280x 768@ 60 RESOLUTION (6) To revert back to the prevous resoluton wthout savng changes place the cursor on the left-most digit and press the button. The screen wll then return to the RESOLUTION menu dsplayng the prevous resoluton. · For some pctures, ths functon may not work well. ViewSonic 30 PJL3211 SETUP Menu SETUP Menu From the SETUP menu, tems shown n the table below can be performed. Select an item using the / cursor buttons, and press the cursor button on the ENTER button to execute the tem. Then perform t accordng to the followng table. Item Description Selectng ths tem performs the automatc keystone dstorton correcton. Projector automatcally corrects vertcal keystone dstorton due to the (forward/backward) setup angle by tself. Ths functon wll be executed only once when selected n the menu. When the slant of the projector s changed, execute ths functon agan. · The adjustable range for correcton wll vary among nputs. For some nput, ths functon may not work well. · When V:INVERT or H&V:INVERT s selected to the MIRROR tem n the SETUP menu, f the projector screen s nclned or angled downward, ths functon may not work correctly. · When the zoom adjustment s set to the TELE (telephoto focus), ths functon may be excessve. Ths functon should be used when the zoom adjustment s set to the full WIDE (wde-angle focus) whenever possble. · When the projector s placed on the level (about ±0°), ths functon may not work. · When the projector s nclned to near ±30 degree or over, ths functon may not work well. · Ths functon wll be unavalable when the Transton Detector s on (46). Using the / buttons corrects the vertical keystone distortion. Shrnk the top of the mage ó Shrnk the bottom of the mage · The adjustable range of ths functon wll vary wth the type of nput sgnal. For some nput, ths functon may not work well. · Ths functon wll be unavalable when the Transton Detector s on (46). AUTO KEYSTONE EXECUTE KEYSTONE (contnued on next page) ViewSonic 31 PJL3211 SETUP Menu SETUP Menu (continued) Item WHISPER Description Using the / buttons turns off/on the whisper mode. NORMAL ó WHISPER · When the WHISPER s selected, acoustc nose and screen brghtness are reduced. Using the / buttons switches the mode for mirror status. MIRROR NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transton Detector s TURN ON and MIRROR status s changed, Transton Detector Alarm (46) wll be dsplayed when projector s restarted after the power swtch s turned off. VOLUME Using the / buttons adjusts the volume. [. . . ] Take or ship the product in the original container packaging to an authorized ViewSonic service center. Round trip transportation costs for in-warranty products will be paid by ViewSonic. Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. [. . . ]