User manual VIEWSONIC Q7

[. . . ] ViewSonic Q7 LCD Display ® - User Guide - Guide de l'utilisateur - Guía del usuario - Model No. : VS11147 Contents Compliance Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Copyright Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Description of Key Functions Symbol Function 1. Move to the next function ( Power indicator Turn the power on or off 1. Select the next OSD icon up ) right ) left Adjust Screen (auto-save) 1. Press the button to display the AUTO adjust OSD menu. Select the desired function menu, by pressing the Push the +or - button, to increase or decrease the value and change the setting. Adjust the value or return to the main OSD menu by pushing the EXIT icon. The OSD menu will close automatically after 8 seconds of inactivity. Adjust Volume Press the o r button to adjust volume without accessing the OSD menu. ViewSonic Q7 6 Main OSD Menu Select function name Function's value Current mode resolution Current mode Frequency Function Icon OSD Sub-menu RGBNOINPUTSIGNAL 1. If this warning appears, please check the connector. If it is bent or damaged, the signal cable may be affected. If the monitor is in "sleep" mode to save power, please move the mouse or press any key to "wake" it and return to working mode. Please check relevant diagrams, and make sure the monitor has been properly configured. If the type is incorrect, please use the cable that came with the monitor. SIGNALOVERRANGE This warning indicates that the input signal frequency does not match those supported by this monitor. For this model, horizontal frequency must be in the range of 30 ~ 80 KHz and vertical frequency in the range of 55~75Hz. Please make sure your input signal is within these ranges. ViewSonic Q7 7 ENGLISH OSD Menu ENGLISH OSD Icon Overview Icon Function Brightness Contrast H. Position Phase Clock Language Color R Color G Color B Color Temperature Recall Exit Volume Description Adjusts brightness Adjusts the ratio of white to black Adjusts horizontal position Adjusts vertical position Adjusts horizontal flicker Adjusts vertical noise and correct horizontal size Selects the display language Adjusts red gain Adjusts green gain Adjusts blue gain Sets the screen to use cool Native. If there is any input from the keyboard or mouse, the monitor will re-enter the working mode immediately. Pause Mode The monitor enters the Pause mode after the field signal is cut off. At this time, power consumption is less than 1W, the screen will turn dark, and the power indicator turns orange. If there is any input from the keyboard or mouse, the monitor will re-enter the working mode immediately. Close Mode The monitor enters the Close mode after both the line signal and field signal are cut off. At this time, power consumption is less than 1W, the screen will turn dark, and the power indicator is off. [. . . ] Any damage of the product due to shipment. Causes external to the product, such as electrical power fluctuations or failure. Use of supplies or parts not meeting ViewSonic's specifications. Any other cause which does not relate to a product defect. [. . . ]