User manual VIEWSONIC VOT120 PC MINI

[. . . ] ViewSonic VOT120 PCMini ® - UserGuide - Guidedel'utilisateur - Bedienungsanleitung - Podrcznikuytkownika - Py - Uzivatelskápíruka - () ModelNo. :VS12869 Preface ComplianceInformation ForU. S. A. Ths devce comples wth part 15 of FCC Rules. Operaton s subject to the followng two condtons: (1) ths devce may not cause harmful nterference, and (2) ths devce must accept any nterference receved, ncludng nterference that may cause undesred operaton. Ths equpment has been tested and found to comply wth the lmts for a Class B dgtal devce, pursuant to part 15 of the FCC Rules. [. . . ] For specific information on the BIOS for your product, please contact ViewSonic®. NOTE: The BIOS menus and selections for your product may vary from those in this chapter. For the BIOS manual specific to your product, please contact ViewSonic® AMI's ROM BIOS provides a built-in Setup program, which allows the user to modify the basic system configuration and hardware parameters. The modified data will be stored in a battery-backed CMOS, so that data will be retained even when the power is turned off. In general, the information saved in the CMOS RAM will not need to be changed unless there is a configuration change in the system, such as a hard drive replacement or when a device is added. It is possible for the CMOS battery to fail, which will cause data loss in the CMOS only. If this happens you will need to reconfigure your BIOS settings. ViewSonic VOT120 12 Main Menu The BIOS Setup is accessed by pressing the F2 button after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. The Main Menu provides System Overview information and allows you to set the System Time and Date. Use the "<" and ">" cursor keys to navigate between menu screens. Table 2 BIOS Main Menu BIOS SETUP UTILITY Main System Date System Time > Primary IDE Master > Primary IDE Slave > Secondary IDE Master > System Information Advanced Boot Chipset [Mon 04/03/2009] [10:18:15] :[Not Detected] :[Not Detected] :[Not Detected] Power Security Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system Time. Exit <> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02. 61 (C)Copyright 1985-2006, American Megatrends, Inc. Below table is described for Primary IDE Master, Primary IDE Slave, and Secondary IDE Master setting. Table 3 IDE Device Setting Menu BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit Primary Master Device :Not Detected Disable: Disables LBA Mode. Auto: Enables LBA Mode if the device supports it and the device is not already formatted with LBA Mode disabled. LBA/ Large Mode DMA Mode S. M. A. R. T [Auto] [Auto] <> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02. 61 (C)Copyright 1985-2006, American Megatrends, Inc. [Auto] ViewSonic VOT120 13 LBA/ Large Mode [Auto] Enables or disables the LBA (Logical Block Addressing)/ Large mode. Setting to Auto enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Options: Disabled, Auto DMA Mode [Auto] Options: Auto S. M. A. R. T [Auto] SMART stands for Smart Monitoring, Analysis, and Reporting Technology. It allows AMIBIOS to use the SMART protocol to report server system information over a network. Options: Auto, Disabled, Enabled Table 4 System Information BIOS SETUP UTILITY Main BIOS Version Build Date: Processor Intel® ATOMTM CPU N270 @ 1. 60GHz Speed Count System Memory Size :1016MB :1600MHz :1 <> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit : 1. 3 :04/03/09 Advanced Boot Chipset Power Security Exit V02. 61 (C)Copyright 1985-2006, American Megatrends, Inc. ViewSonic VOT120 14 Advanced Menu Table 5 Advanced Menu BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit Advanced Settings Warning: Setting wrong values in below sections may cause system to malfunction. > OnBoard Peripherals Configuration > Hardware Health Configuration <> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02. 61 (C)Copyright 1985-2006, American Megatrends, Inc. Press <Enter> to select a sub-menu for detailed options. Table 6 OnBoard Peripherals Configuration Settings BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit OnBoard Peripherals Configuration Settings USB Controller USB 2. 0 Controller USB Device Legacy Support Audio Controller Onboard LAN Controller [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] Options Disabled Enabled <> Select Screen Select Item Onboard LAN OPTROM [Disabled] +- Change Field Tab Select Field WLAN Controller [Enabled] F1 General Help F10 Save and Exit ESC Exit V02. 61 (C)Copyright 1985-2006, American Megatrends, Inc. USB Controller [Enabled] Options: Enabled, Disabled USB 2. 0 Controller [Enabled] Options: Enabled, Disabled ViewSonic VOT120 15 USB Device Legacy Support [Enabled] Options: Enabled, Disabled, Auto Audio Controller [Enabled] Options: Enabled, Disabled Onboard LAN Controller [Enabled] Options: Enabled, Disabled Onboard LAN OPTROM [Disabled] Options: Enabled, Disabled WLAN Controller [Enabled] Options: Enabled, Disabled Table 7 Hardware Health Configuration BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit Hardware Health Configuration CPU Shutdown Temperature CPU Temperature Fan1 Reading [Disabled] :43°C/ 109°F :366 RPM Disabled 80°C/176°F 85°C/185°F 90°C/194°F 95°C/203°F +VCORE +VIN +5. 00V :1. 196 V <> Select Screen Select Item :4. 958 V +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02. 61 (C)Copyright 1985-2006, American Megatrends, Inc. :12. 35 V ViewSonic VOT120 16 Boot Menu Table 8 Boot Menu BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit Boot Settings > Boot Device Priority > Hard Disk Drives Specifies the Boot Device Priority sequence. > Quick Boot > Bootup Num-Lock > Wait For 'F1' If Error > Hit 'F2'Message Display <> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02. 61 (C)Copyright 1985-2006, American Megatrends, Inc. [Enabled] [ON] [Enabled] [Enabled] Boot Device Priority The items allow you to specify the Boot Device Priority sequence. Hard Disk Drives The items allow you to specify the Boot Device Priority sequence from available Removable Drives. Quick Boot [Enabled] Enabling this item allows BIOS to skip some Power On Self Tests (POST) while booting to decrease the time needed to boot the system. [. . . ] Causes external to the product, such as electrical power fluctuations or failure. Use of supplies or parts not meeting ViewSonic's specifications. Any other cause which does not relate to a product defect. Removal, installation, one way transportation, insurance, and set-up service charges. [. . . ]