User manual VIEWSONIC VPC190

[. . . ] ViewSonic VPC190 All-in-One PC ® Model No. : VS13111 Table of Contents Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Declaration of RoHS Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · You want to restore the factory default settings. · You want to modify some specific settings of the hardware. · You want to modify some specific settings to optimize system performance. Starting BIOS Setup A keyboard is required to access and make selections in the BIOS Setup Utility. Make sure the keyboard is properly installed before you power up your All-in-One PC. NOTE The Setup screens shown in this chapter are for your reference only. The actual items or settings may slightly differ from that on your computer. · The Setup utility may have been updated after the publication of this user guide. · The settings you select in your operating system might override similar settings in the Setup. To run BIOS Setup, follow the steps below: 1. When the ViewSonic® logo appears, quickly press the Delete button on the keyboard. NOTE If Windows operating system starts up before you press the Delete button and you still wish to enter the BIOS Setup, restart the All-in-One PC then follow the same procedures above. Moving Around and Making Selections The following table lists the control keys you will use to move around and select BIOS settings. Key <F1> <ESC> ¨ Æ keys ¦Ø Function General help window Exit current menu Select a different menu Select Item Cycle cursor up/down keys <Tab> or <ShiftTab> ViewSonic VPC190 17 BIOS Setup Utility Key <Home> or <End> <PgUp> or <PgDn> <Enter> <-> <+> <F7> <F8> <F9> <F10> Function Move cursor to top/bottom of the window Move cursor to next/previous page Go to Sub Menu Select the previous value/setting of the field Select the next value/setting of the field Discard Changes Load Fail Safe Defaults Load the Optimal Defaults Save Change and Exit Menu The BIOS Setup Utility is divided into Five menu categories: Main, Advanced, Boot, Security, and Exit. Use the left and right arrow keys to move through the menu selections. Sub-menu Inside the menu window are the sub-menus. Highlighted items denote that the submenu options can be changed. Use the up and down arrow keys to move through the sub-menu. A sub-menu with a pointer symbol on the left indicates that more options can be launched from this item. To exit a sub-menu, press [Esc]. General Help You can access help from any menu. Press [F1] to view the general help window. It lists the appropriate keys to use to browse and configure BIOS settings. ViewSonic VPC190 18 BIOS Setup Utility Main Menu The Main menu lets you adjust the system time and date. It also displays the processor, memory and BIOS version information. To adjust the time, go to System Time. Press [Tab] or [Shift Tab] to go to the next / previous field, then use + or - keys to adjust the values. Advanced Menu WARNING If you are not familiar with these settings, it is recommended to use the default configuration for the Advanced Menu options. Setting the wrong values may cause the system to malfunction. ViewSonic VPC190 19 BIOS Setup Utility The Advanced Menu lets you view and configure the following: CPU Configuration The CPU Configuration displays your All-in-One PC's CPU specification, such as the module version, manufacturer, frequency, speed among others. This submenu allows you to enable or disable the following settings: Max CPUID Value Limit: It is recommended that you leave it at the default setting of Disabled. [. . . ] Any product on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from: a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product. Any damage of the product due to shipment. [. . . ]