User manual VIEWSONIC VT2755LED

[. . . ] VT2755LED LCD TV - User Guide - Guide de l'utilisateur - Guida dell'utente IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www. viewsonic. com in English, or in specific languages using the Regional selection box in the upper right corner of our website. "Antes de operar su equipo lea cuidadosamente las instrucciones en este manual" Model No. : VS14569-1M Contents Compliance Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select TV Source from Air or Cable, then press ENTER to continue. The Initial Setup will be completed after Cannel scanning is finished. To interrupt the scanning, press MENU at any time. (See Figure5) Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 ViewSonic 14 VT2755LED Using the TV Features Changing Channels 1. Using Channel Buttons Press CH button to change channels, and the TV changes channels in sequence. You will see all channels that have been memorized. Channels erased or not memorized will not be shown. Using Number Buttons (1) ATV The "-" button has no function in ATV mode. Directly press the number buttons to select channels. (2) DTV Use "-" button to select the sub channel in DTV. Press 8 press 0 press "-" press 3. Return to the previous channel, press RETURN button. Adjusting the Volume Press VOL +/- to adjust volume. To restore volume, press MUTE again, or press VOL +/- directly. Viewing the Displayed Information To display the current information of the LCD TV: Press INFO, and the current state will be displayed on the screen. (It shows all or some of the information about Input, Channel, Resolution, Audio Type, etc. , depending on what input source it is in) The picture here shows an example of the INFO screen in a DTV source. ViewSonic 15 VT2755LED ENGLISH Using the TV Features Storing Channels into Memory 1. Press the MENU button to display the OSD main menu. Press or to select the "CHANNEL" menu, then press ENTER or to enter the menu. Press or to select "TV Source", and use or to select the antenna connection to "Air" or "Cable". Air: RF signal programs by "Air". Cable: RF signal programs by "Cable". Press or to select "Auto Scan", then press to enter. Press or to select "Scan all channels", "Digital channel only", or "Analog channel only" and press to perform Auto Scan function. To stop scanning, press MENU at any time. [. . . ] Round trip transportation costs for in-warranty products will be paid by ViewSonic. Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages. [. . . ]