Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual VINCENT KHV-1. We hope that this VINCENT KHV-1 user guide will be useful to you.
Lastmanuals help download the user guide VINCENT KHV-1.
Detailed instructions for use are in the User's Guide.
[. . . ] Dear Customer, we thank you for the confidence you prove in purchasing our product. It will match your high demands towards sound and manufacturing quality. Though it is understandable that you want to plug and play this product instantaneously, we encourage you to read this manual carefully before installation. It will help you in handling and operating this machine in your system and obtaining the best possible performance, even if it was installed by your dealer. [. . . ] Along with the hi-fi furniture, speakers and cables of our product line in this way a perfectly harmonious system can be set up. 30 seconds during warm-up after turning the unit on and stays permanently on as long as the unit is turned on and in ready for use. PHONES: Headphone socket Headphones with an impedance of at least 32 can be connected to this 6. INPUT: Input Selector This push button allows you to choose one of the two input sources (CD, AUX). POWER This is the main power switch for turning on and off the device. The KHV-1 is separated from the mains voltage when switched off and cannot be set into a standby state. PRE OUT: preamplifier output With this pair of connectors you can connect the preamplified stereo audio signal of the currently selected source to the main amplifier channels. volume control and Mute affect the signal at this output. Two main amplifier channels can be connected here to supply the loudspeakers. INPUT: Terminal for stereo audio signals of the source equipment Here you find two stereo RCA inputs for source equipment with analogue stereo (line level) audio output. LAMP Set one of three brightness levels for the tube window or turn this light off. AC: Power Connector To establish the power supply, connect the plugs of the power cable to the device and to a suitable wall outlet. Connect the power cable between device and power supply only after all other connections have been made. DURING INSTALLATION PLEASE OBSERVE THE FOLLOWING ADVICE: Protective caps Prior to the first installation the protective plastic caps must be removed from all the connections used at the rear of the unit. Cable connections Make sure that all plugs fit tightly. Inadequate connections can cause noise interference, failures and malfunctions. Make sure that you do not get these connections confused during installation!Make sure that you do not mix up the analogue inputs for right and left. The RCA plugs for these are mostly colour coded as follows: red for the right channel, black or white for the left channel. To make the most of the components' sound potential, only high quality loudspeakers and connecting cables, for example Vincent cables, should be used. Your local stockist will be glad to advise you about this. Contacting the middle pin of the RCA plugs with the outer ring of the RCA chassis jack may lead to damages to the main amplifier if it is switched on! [. . . ] The speaker cables are not properly connected to the main amplifier's terminals or are defective. Check the connection and ready status of the main amplifier(s) and whether it is/they are working. The source equipment is giving signal on only one channel. One of the signal cables between audio source and preamplifier inputs has not yet been plugged in or is defective. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE VINCENT KHV-1
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual VINCENT KHV-1 will begin.
