User manual VISIONEER ONETOUCH 9420

[. . . ] Visioneer OneTouch 9420 USB Scanner User's Guide FOR WINDOWS COPYRIGHT INFORMATION Copyright © 2004 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of ScanSoft, Inc. [. . . ] Note: Remember that left-clicking a button on the OneTouch Button Panel starts the scanner scanning. Right-clicking opens the OneTouch Properties window. The OneTouch Properties window opens for that button. CONFIGURING THE ONETOUCH BUTTONS 47 Right-click on a button (for example, the Scan button) and the Properties window opens for that button. I You can also open the OneTouch Properties window by pressing and holding down a button on the scanner. The OneTouch Properties window then opens to the settings for that button. 48 VISIONEER ONETOUCH 9420 USB SCANNER USER'S GUIDE ABOUT THE ONETOUCH PROPERTIES WINDOW The OneTouch Properties window is where you can select new settings for the buttons. The tabs across the top of the window correspond to the buttons on the scanner. Note: Some of the options on the OneTouch Properties Window (and other OneTouch windows and dialog boxes) are "grayed out" and are not available. Grayed out options are not appropriate for your Visioneer 9420 scanner. If you use the OneTouch application with other Visioneer scanners, grayed out options become active, if appropriate. The following example of the OneTouch window shows the settings for Scan Button. The button is set to scan with the scan configuration named Color Photo and then open ScanSoft PaperPort to display the scanned image. The format option is set to scan in the JPG image format. Click the tab that corresponds to the scanner button you want to configure. Select the destination application that will open when you are finished scanning. You use the destination application to view and work with your scanned images. Select the file format for your scanned images. Select a configuration for scanning the item. CONFIGURING THE ONETOUCH BUTTONS 49 The settings on the Properties window are: Select Destination--the list of applications that can open to display the scanned image for the selected button. To configure the list of available applications, click the Options tab at the top of the dialog box and select the desired options. See "Selecting Options for a Button" on page 65 for more information. Select Configuration--the list of available scan configurations for the selected button. The configuration settings include: scanning mode, resolution (dpi), page size, brightness, color saturation, hue, and gamma. To see a selected scan configuration's settings, click on it in the list. Click again to close the detailed information. Click a configuration to view the details of its settings. Click again to close the details. The icons next to each scan configuration indicate the scanning mode. Color Black and White Grayscale Configure Before Scan Note: Use Configure Before Scan if you want to set the scanning mode manually before scanning. [. . . ] Windows ME: Click the Add/Remove button. Windows 2000 or XP: Click the Change/Remove button. I 3. From the list of programs, select OneTouch 4. 0. I I 4. On the Perform Uninstall window, click Remove. [. . . ]