User manual VISONIC POWERMAX REMOTE PROGRAMMER SOFTWARE

[. . . ] PowerMax Remote Programmer Software User Guide Copyright and Warranty _________________________________________________________ i Copyrights & Warranty © Copyright 2010 by Visonic Ltd. , 24 Habarzel Street, Tel-Aviv 69710, ISRAEL. All Rights Reserved. No part of this publication may be reproduced or distributed in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Visonic Ltd. Microsoft is a registered trademark of Microsoft Corp. All other products or services referred to in this manual are the trademarks, service marks, or product names of their respective holders. [. . . ] Upload the keyfob data from the PowerMax. In the Keyfob Enrollment table, enter the keyfob ID, the sync. counter backup numbers displayed on the screen next to the keyfob number you enrolled the keyfob to. Logout and disconnect from the PowerMax. Connect and login to your customer's PowerMax control panel. Click the Options icon in the tool bar or select Options in the View menu. Check the Send updated data immediately checkbox. counter backup numbers to the relevant keyfob in the Keyfob Enrollment table. 2. 10. Data Details Tables __________________________________________________________ 6-5 Every cell you update will be automatically downloaded to the customer's PowerMax. (Be sure not to change other parameters. ) 11. Now all you have to do is to send the keyfob transmitter to your customer!To Delete a Keyfob In the ID column, change the ID to 00000000, and then download to the control panel as detailed in chapter 7: Connecting to the PowerMax Control Panel. 6. 5 1W Keypad Enrollment A 1W (one-way) Keypad is a multi-button wireless keypad unit. For each PowerMax control panel, there are a total of eight 1W keypads. In order that the control panel and the PowerMax Remote Programmer will recognize the Keypads, each one must be enrolled in the system, and linked to a specific ordinal number between 1 and 8. Keypad initiated events are subsequently identified and registered with reference to these numbers. This table displays the keypad ordinal number, an indication whether the keypad has been enrolled, the keypad ID, the keypad sync. The PowerMax Remote Programmer enables enrolling and deleting keypads. To Enroll a Keypad to the Control Panel In order to perform this procedure collect together: · A PowerMax control panel, which will be used to pass the keypad identifying information from the keypad through to the PC and from there to the customer's PowerMax control panel. The keypad that is to be enrolled and sent to the customer. · 1. 4. Enroll the keypad to the control panel as detailed in the PowerMax Programming Guide. Connect and login via serial connection to the PowerMax as detailed in chapter 7: "Connecting to the PowerMax Control Panel". Upload the keypad data from the PowerMax. [. . . ] See Chapter 9, which provides may be details for dealing with the problem. temporarily denied. POSSIBLE SOLUTION D2. a) Disarm PowerMax Control Panel, then change upload setting to Any Time. b) Wait until the Exit/Entry state terminates and the control panel enters a valid state (Disarm/Arm/Home). [. . . ]