User manual VITEK VT-DVR04Q V1.0

[. . . ] 4 CH Digital Quad Recorder VT-DVR04Q Please read this instructions thoroughly before operation and retain it for future reference. User Manual V 1. 0 WARNING DQR All the safety and operating instructions should be read before operation. The improper operation may cause permanent damage. Please use the adaptor provided from VITEK (Other adaptor is not suitable for this machine). Please lift and place this equipment gently. Do not expose this equipment to open sunlight. [. . . ] The password screen will appear: Detailed Menu Setup Password: 0000 NOTE : The default Password is 0000. Simply press the Enter button to access the Menu. To key-in the Password, press the "Right" and "Left" buttons to move between numbers, and use the "Up" and "Down" buttons to input the number. Press the ENTER button once the correct Password is entered. If you have selected the specific date and recording timer set from that specific day to a new day, then the Recording Timer Schedule will be set as whole week. For specific date of Recording Timer Schedule, it is not recommended to set End Time over 23:59. For Example:If you set Timer Schedule Day as Sunday, and START from 11:30, but End on 00:20, then Recording Timer Schedule is set as from every Sunday's 11:30 to next Sunday's 00:20. If you only want to set Recording Timer Schedule from every Sunday 11:30 to Monday 00:20, then you should set Recording Timer Schedule as Sunday from 11:30 to 23:59, and Monday from 00:00 to 00:20. (MENU) TIMER CAMERA RECORD ALARM DWELL REMOTE SYSTEM EVENT 2. START Select the starting time for the recording. 3. END Select the finishing time for the recording. 4. IPS Stand for Images Per Second and it could let you see Record submenu for more details. NTSC603015842 1OFF PAL502512632 1OFF (TIMER) DAY START END IPS DAILY 00:00 00:00 OFF DAILY 00:00 00:00 OFF DAILY 00:00 00:00 OFF DAILY 00:00 00:00 OFF DAILY 00:00 00:00 OFF DAILY 00:00 00:00 OFF DAILY 00:00 00:00 OFF DAILY 00:00 00:00 OFF TIMER ENABLE : YES 5. TIMER ENABLE Enables / Disables Timer recording function CAMERA _ _ _ CH1_ _ _ _ _ _ _ CH2_ _ _ _ : 5 BRIGHTNESS :5 BRIGHTNESS CONTRAST : 5 CONTRAST :5 COLOR : 5 COLOR :5 (MENU) TIMER CAMERA RECORD ALARM DWELL REMOTE SYSTEM EVENT _ _ _ CH3_ _ _ _ _ _ _ CH4 _ _ _ BRIGHTNESS : 5 BRIGHTNESS CONTRAST : 5 CONTRAST COLOR : 5 COLOR :5 :5 :5 1. TITLE Assign a title to each camera input. Initially each title is the camera's number. 2. Brightness / Contrast / Color Have a video adjustment (Brightness / Contrast / Color) of each channel. The level is from 0 to 9. 12 RECORD 1. RECORD IPS Select the images per second of recording. The options are as following : NTSC603015842 1 PAL502512632 1 (MENU) TIMER CAMERA RECORD ALARM DWELL REMOTE SYSTEM EVENT 2. RECORD QUALITY There are four quality settings : BEST, HIGH, NORMAL and BASIC. NOTE : The relationship of Record time, IPS and record quality, please refer to page. 23 Recording Speed. 3. RECORD MODE (RECORD) Set recording mode between Frame and Field. RECORD IPS : 60 NOTE : It is recommended that you leave the Record Mode as Field. [. . . ] Under normal operation, signal remains "High". PIN 7. EXTERNAL ALARM NC Under normal operation COM connect with NC and disconnect with NO. But when alarm triggered, COM disconnect with NC, and connect with NO. PIN 8. EXTERNAL ALARM NO Under normal operation, COM will disconnect from NO. [. . . ]