User manual VITEK VT-E

[. . . ] VT-E Series 4, 8, and 16 Channel Digital Video Recorders VITEK · 4, 8, or 16 Video Inputs · Remote Viewing over the Internet or LAN · Supports both Dynamic and Static IP Addresses · Up to 120 IPS Recording · MPEG-4 Compression · 4 Audio Inputs / 1 Audio Output · 4, 8, or 16 Channel Alarm Inputs · Control locally via Front Panel, USB Mouse or with the Included IR Remote Control · PTZ Control over RS-485 · Built-In Bandwidth Throttling Before Installation ---------------------------------------------------------- 5 Main Features ------------------------------------------------------------- 6 System Organization -------------------------------------------------------- 8 System Contents ----------------------------------------------------------- 9 System Configure --------------------------------------------------------- 10 Front panel description -------------------------------------------------- 10 Rear panel description -------------------------------------------------- 11 Remote Controller description --------------------------------------------- 13 Connect & Power On ------------------------------------------------------- 14 Live display configure ------------------------------------------------------- 15 Split screen ---------------------------------------------------------- 15 Live display edit mode -------------------------------------------------- 16 Digital zoom ---------------------------------------------------------- 17 Sequence ------------------------------------------------------------ 18 Key Lock Function ----------------------------------------------------- 18 PTZ Camera control ---------------------------------------------------- 19 GENERAL ---------------------------------------------------------------- 20 DISPLAY ------------------------------------------------------------- 21 OSD ----------------------------------------------------------- 21 Monitor --------------------------------------------------------- 22 Sequence ------------------------------------------------------- 23 CAMERA ------------------------------------------------------------- 28 Camera Title ------------------------------------------------------ 29 Color Setup ------------------------------------------------------ 29 PTZ Setup ------------------------------------------------------- 30 Motion Sensor ---------------------------------------------------- 31 SOUND -------------------------------------------------------------- 34 Audio ----------------------------------------------------------- 35 Buzzer ---------------------------------------------------------- 35 2 SYSTEM ------------------------------------------------------------- 36 Date /Time ------------------------------------------------------- 36 Network ---------------------------------------------------------- 37 Mail ------------------------------------------------------------- 38 User Management -------------------------------------------------- 38 System Management ------------------------------------------------ 41 EVENT / SENSOR ------------------------------------------------------ 42 HDD Event -------------------------------------------------------- 42 Alarm Input ------------------------------------------------------- 43 Alarm Out -------------------------------------------------------- 43 Buzzer Out ------------------------------------------------------- 45 E-mail Notification -------------------------------------------------- 46 DISK MANAGEMENT ---------------------------------------------------- 47 RECORD ----------------------------------------------------------------- 48 Recording Operation ---------------------------------------------------- 48 Record Schedule Setup ------------------------------------------------49 Alarm Record Setup ---------------------------------------------------- 55 BACKUP ----------------------------------------------------------------- 56 SEARCH ----------------------------------------------------------------- 59 Search -------------------------------------------------------------- 59 Event Search --------------------------------------------------------- 62 Remote Client Setup -------------------------------------------------------- 64 Client software installation ------------------------------------------------ 64 Client software organization ---------------------------------------------- 66 Explanation of Function keys ------------------------------------- 67 Create a connect group ------------------------------------------------- 68 Detail Setup ---------------------------------------------------------- 69 Additional Configuration ------------------------------------------------- 71 3 Remote Search ------------------------------------------------------------ 72 Explanation of function keys ------------------------------------------ 73 Quick Search --------------------------------------------------------- 74 Archiving --------------------------------------------------------- 75 Still Shot -------------------------------------------------------- 75 Log Viewer ------------------------------------------------------- 76 Backup Player ----------------------------------------------------- 76 Print ------------------------------------------------------------ 77 Event Viewer ------------------------------------------------------ 77 Remote Recording Setup ------------------------------------------------- 78 Record ---------------------------------------------------------- 78 Camera ---------------------------------------------------------- 79 Sound ----------------------------------------------------------- 79 Event / Sensor ----------------------------------------------------- 80 System ---------------------------------------------------------- 81 4 BEFORE INSTALLATION Installation should be carried out only by qualified personnel and in accordance with any electrical regulations in force at the time The DVR must be placed on a stable surface or mounted in an approved cabinet. Adequate ventilation must be provided, taking particular care not to block any of the air vents on the DVR. Adequate protection against lightning strikes and power surges must be installed to prevent damage to the DVR. Any safety warnings on the DVR and in these instructions must be adhered to. If cleaning is necessary, shutdown the DVR and disconnect power first. never use any abrasive cleaners. Do not attempt to service or repair the DVR as opening or removing covers may expose dangerous voltages or other hazards. Refer all servicing to qualified service personnel. 5 MAIN FEATURES MOUSE CONTROL Designed to be controlled by mouse and easy to use. ENHANCED GRAPHICAL USER INTERFACE [GUI] The DVR menu structure and on screen display is presented in a simple to use and logical GUI format. GENUINE TRIPLEX OPERATION The DVR will continue to record at full frame rate during local playback, local setup, multi user remote viewing and playback and remote setup. AUDIO 2 audio inputs(8, 16CH, in case of 4CH, 4 audio inputs) are supported which can be assigned to any video channel. Live and recorded audio can be monitored remotely over the internet and remote `talkback' audio transmission to the DVR is also possible. BACKUP Recorded footage (including audio) can be archived to USB memory stick. [. . . ] Then click the ON/OFF value by the button. And click the START menu for the Format. To manage the internal hard drives, highlight DISK MANAGE and press ENTER. RECORD TIME LIMIT : In certain circumstances, it may be necessary to limit the amount of footage stored. on the DVR (to comply with data protection laws for example). Recording can be limited to 12 hours, 1 day, 2 days, 3 days, 1 week or one month. Once the DVR has this amount of footage stored, it will start to overwrite the earliest recorded footage. OVERWRITE : When set ON, the DVR will start overwriting the earliest recorded footage once the hard drive becomes full. In this case, the percentage of hard drive used shown in live display will always be 99%. When set to OFF, the DVR will stop recording when the disk becomes full. FORMAT : If necessary, all footage can be erased from the DVR using this option Please note: When RECORD TIME LIMIT is set, the percentage of HDD used shown in live display mode may never reach 99%. For example, if the total HDD capacity of the DVR allows for a recording time of 4 days under normal operation, if the RECORD TIME LIMIT is set to 2 days, the percentage of HDD used will never exceed 50%. Please note: When a RECORD TIME LIMIT is set, the OVERWRITE option cannot be changed. 47 RECORD RECORD Click the RECORD menu. To setup the recording behavior of the DVR, highlight RECORD MENU and press ENTER button. RECORDING OPERATION Click the RECORDING OPERATION menu and click the each value. Then click the value by the button to change. SCHEDULE MODE : Either DAILY (one schedule will apply to every day of the week) or WEEKLY (each day of the week has its own schedule). PRE EVENT RECORDING TIME : When the DVR is not in continuous recording mode, this setting determines the amount of footage that is always recorded before an event occurs. (motion detection, alarm input etc. ) POST EVENT RECORDING TIME : When the DVR is not in continuous recording mode, this setting determines the amount of footage that is always recorded after an event occurs. (motion detection, alarm input etc. ) 48 RECORD TIMER / MOTION SETUP Click the TIMERMOTION SETUP menu. This setup screen allows the operator to configure scheduled and motion detection recording. There are 2 sections: PARAMETER : Recording settings for each channel can be defined across a 24 hour period, in blocks (for example between 09:00 and 18:00) or for each individual hour. Note that when SCHEDULE MODE is set to WEEKLY, each day of the week can also be selected. SCHEDULE : This section determines at what times the DVR will record and whether it is continuous recording or motion detection. PARAMETER To change PARAMETER settings, highlight MOTION RECORD SCHEDULE and press ENTER. The 24 hour time bar is highlighted in yellow. 49 RECORD PARAMETER continued Click the TIMEBAR that user wants. Press ENTER to display the green cursor. The green cursor shown represents one hour (in this case between 00:00 and 01:00). The table below the time bar shows the recording settings for this time period. Drag the time that user wants. Example: To change the recording settings between 09:00 and 18:00. Use the CURSOR KEYS to move the green cursor to the 09:00 position and press ENTER. [. . . ] · PTZ Setup the PTZ camera address, Protocol, Baud rate and Properties for detail setup. · Motion Area Setup the motion sensitive and motion area. SOUND · Live Audio Setup Live Audio : On/Off. Audio Monitoring Channel : Select audio channel for live. Network Audio TX : Choose the Audio transmission. [. . . ]