User manual VITEK VT-H41

[. . . ] 4 Channel Digital Video Recorder with H. 264 Compression VT-H41 VITEK · 4 Video Inputs with 1 BNC & 1 VGA Outputs · H. 264 Compression · Supports both Dynamic and Static IP Addresses · Up to 120 IPS Recording / Live Display · Remote Viewing over the Internet or LAN · Supports one internal SATA Hard Drive · 250GB to 1TB Internal Storage Options · Quadplex operation enabling simultaneous recording, playback, networking, and backup · 4 Alarm Inputs / 1 Relay Out · 4 Audio Inputs & 1 Output · PTZ Control over RS-485 · Control locally via Included IR Remote control, or Front Panel Controls · Backup via Ethernet or USB VT-H41 SAFETY PRECAUTIONS EXPLANATION OF SYMBOLS This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance. This symbol is intended to alert the user to the presence of unprotected "dangerous voltage" within the product's enclosure that may be strong enough to cause a risk of electric shock WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION Changes or modifications not expressly approved by the manufacturer may void the user's authority to operate this equipment. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. WARNING Do not use if the unit emits smoke, strange sounds are heard, or odor is emitted. Make sure the power cable is not damaged. Make sure there is no dust accumulation on the power plug or the outlet. [. . . ] Then SEARCH screen is displayed. Go to ARCHIVE field using buttons and press SEL button. ARCHIVE search calendar is LIST screen is displayed. Select the date in Red using displayed. buttons and SEL button. 38 VT-H41 Select VIDEO clip from the list using or the first scene of the video is displayed. buttons and SEL button. Then a paused image Press CAPTURE button. Select AVI or EXCLUSIVE VIDEO using buttons and press SEL button. Select USB FLASH DRIVE using backup status bar is displayed. buttons and press SEL button. SAVING screen with 39 VT-H41 After the backup is done, "BACKUP IS COMPLETED" message is displayed. 5-4. Playback of AVI or EXCLUSIVE VIDEO Playback of AVI format: AVI format video can be played back by Windows Media PlayerTM or other media player that is compatible with AVI format video. When PC doesn't have proper H. 264 CODEC, the media players can not playback the AVI format video. In this case, you may install CODEC that is provided on the DVR (Exclusive video format): DVR format video can be played back by the player (the exclusive viewer) that the DVR copies on USB thumb drive with video. Three files are copied on USB thumb drive - DVR file: Exclusive format video file. - SMI file: Title file of date and time. - PLAYER: Exclusive video viewer. 40 VT-H41 6. SETUP Press the SETUP button, then the password window is displayed. The default password is 1111, which can be entered by pressing the up button 4 times and then pressing the SEL button. After input password, the SETUP screen is displayed. 6-1. LIVE Item OSD SEQUENCE Description Enable/disable OSD (on-screen-display). Enable/disable sequential display of video channels in full screen 41 VT-H41 mode. SEQ-DWELL TIME OSD CONTRAST CHANNEL DISPLAY SEQUENCE LIST BRIGHTNESS CONTRAST HUE SATURATION Dwell time for each cannel display in sequential display mode. Set the visibility level of the On Screen Display (OSD) Select the channel for applying the following settings. Enable/disable display of the video channel in live display mode Enable/disable the specified channel to be included in sequential list. Change the brightness value for the specified channel Change the contrast value for the specified channel Change the hue value for the specified channel Change the saturation value for the specified channel buttons. OSD ­ Select ON/OFF using ON: OSD (on-screen-display) such as the time, date, the channel, and the characters and symbols are displayed on the screen. OFF: OSD (on-screen-display) is NOT displayed, except recording indicator icons. SEQUENCE ­ Select ON/OFF using buttons. ON: Channel in full screen mode is rotated. OFF: Channel on a single live screen is NOT rotated. [. . . ] Application: Enter a description of the DVR (Example: store1) Start: Enter the first number of the port you need to port forward (Example: 5445) End: Enter the last number of the port you need to port forward (Example: 5445) Protocol: Select Both. IP address: Enter the IP address of the DVR on SETUP>NETWORK>LAN>IP ADDRESS. Select the Save settings button located on the bottom of the window. Then Port forwarding is finished. You can learn how to port forward many kinds of Routers from the bellow site. http://www. portforward. com/english/routers/port_forwarding/routerindex. ht m 69 VT-H41 B. [. . . ]