User manual VITEK VT-PTZ10

[. . . ] VT-PTZ10 Ultra-Compact PTZ Camera with 10x Optical Zoom VITEK · Built-In 3. 8-38mm Lens with 10x Optical / 10x Digital Zoom. · High Performance 1/4" CCD with 500 TV Lines. · True Day/Night function with ICR. · 128 Presets programmed with view direction, zoom, and BLC. [. . . ] Twist the Joystick to enter the title by scrolling through the alphanumeric characters and move the handle to the right or left to move to the next space. Press ENTR key or move the Joystick down to finish title mode. When finish entering the title, select "START ANGLE" with the Joystick. Hold down the SHFT/PGM key while selecting the start position using the Joystick. Current panning position will be displayed. Release SHFT/PGM key to complete the selection of the start position. (Or twist zoom handle or hit zoom button to start PTZ control for view selection and hit the Focus button to stop. ) 5. Move the Joystick downward to select "END ANGLE. " Hold down the SHFT/PGM key while moving the Joystick to select the end position. The end position angle should be larger than start position. Release the SHFT/PGM key to complete the selection of the end position. (Or twist zoom handle or hit zoom button to start PTZ control and hit the Focus button to stop. ) 6. Move the Joystick downward to select "Tilt & Zoom. " Set the zoom and tilt angle by holding down the SHFT/PGM key. Moving the Joystick downward to select "Speed" and set the speed by twisting the Joystick clockwise or counterclockwise or move the Joystick left/ right to select the auto scan speed. Select Save and Exit by moving the Joystick to the right. Press ESC to exit the program without saving. Pressing the HOME or OFF button to delete stored data, 000 will be displayed immediately. 26 VT-PTZ10 3. 1. 5 TOUR (or MENU => FUNCTIONS => TOUR, Short Cut: TOUR) There are 4 programmable Tours. Each Tour consists of up to 8 Preset positions, Patterns, Scans or other Tours. Using second-level Tours, it can be expanded up to 56 functions in a single Tour. However tours in the second level Tour will be ignored when called by the first level Tour. This can be best illustrated by the following example: If Tour Tour Tour Tour 01 02 03 04 : : : : Preset 02, Preset 03, Tour 02, Tour 03 Preset 05, Preset 06, Tour 04, Preset 05 Preset 07, Pattern 01 Preset 08. Preset 05, Pattern 01 Tour1 executes as follows: Preset 02 Preset 03 Preset 05 Preset 06 Preset 05 Preset 07 Pattern 01 . . . (Repeat) ---Tour 04 in Tour 02 will be skipped in Tour 01 Tour 02 executes as follows: Preset 05 Preset 06 Preset 08 Preset 05 Pattern 01 Repeat (Tour 04 is still valid if called directly from Tour 02. ) TOUR 01:xxxxxxxxxxxxxxxx 01/04 FUNC PRST PTRN SCAN TOUR ------------PREV SAVE NO 064 004 016 004 --------S DW TITLE S 03 ---------------S 03 ---------------S 03 ---------------S 03 ---------------- 03 ---------------- 03 ---------------- 03 ---------------- 03 ---------------NEXT AND EXIT Preset 05 . . . xxxxx --Speed DWell PRST PTRN SCAN TOUR : 16 digits of title for tour label : blank preset position : F-Normal/ M- Medium D. Scan/ S- Slowest D. Scan : 03-99 Sec : PRESET 1~64 : PATTERN 1 : SCAN 1~4 : TOUR 2~4 27 VT-PTZ10 Follow the steps below to program the Tours: 1. [. . . ] When IR mode is active, clearer images may be obtained under low-light conditions. LINE LOCK When line lock is enabled, it prevents vertical video rolling when switching multiple cameras to a single monitor. If text appears slightly tinted on color monitors, disabling the line lock may prevent this problem. NORTH DIRECTION User-definable setting that may correspond to magnetic north or some well-known landmark. [. . . ]