User manual VITEK VTA-D104

[. . . ] Copyright 2010 VITEK Industrial Video Products, Inc. Authentication CE, FCC, KCC Trademark Ethernet(TM) is the trademark of Xerox Corporation. Microsoft(TM), MS-DOS(TM), Windows(TM logo), Windows(TM) and Windows NT(TM) are the trademarks of Microsoft Corporation, used in the United States and elsewhere. Cautions We strongly recommend that users read all safety cautions carefully before operating the product. Since the indicated cautions contain critical safety information, they must be fully complied with. [. . . ] MENU > DISPLAY > Monitoring Event Pop-up: Pops up the camera image in full screen when pre-set event occurs. Sequence Interval: Set time interval between cameras under sequence mode. Event Pop-up: Pop up the camera image in full screen on spot monitors when pre-set event occurs. Sequence Interval: Set time interval between cameras on spot monitors for sequencing. Select camera display option on spot monitors. Spot outs support full and sequential camera displays. Press multi cameras for sequential display on spot monitors. button to set single or 24 CHRONO Series DVR 2-4. RECORD Under Record menu, Record configuration options for Storage, Record and Record Tools can be selected. MENU > RECORD > Storage In Storage, it displays the installed/connected storage status such as Capacity, Type, Usage and Status. Format: Press Format to format selected HDD. Record: Displays the recording period and data stored on HDD. This situational variance will affect the file sizes more at lower frame rate settings. It does not change IPS according to the change of resolution. 26 CHRONO Series DVR Note: approximate size for each resolution ­ CIF: 360X240, Half D1: 720x240, D1: 720x480 In Recording Status, current recording options and status are displayed. 2-5. NETWORK Under Network menu, Network configuration options for network Address, DDNS, Remote Notification and Transmission can be set up. MENU > NETWORK > Address In Address, Information such as Type, IP address, Subnet Mask, Gateway Port and DNS can be set for network connections. Type: Select the type of network configuration from: Static IP, DHCP and ADSL (with PPPoE). IP Address: Enter IP address using Subnet Mask: Enter Subnet Mask using Gateway: Enter Gateway using button. button. DNS: Set up the IP address of the DNS server. If you set up the DNS Server, the domain name of the DVRNS server instead of the IP address can be used during the DVRNS Server setup. In Port, Select appropriate port number for external access to the system. The port list shows necessary ports to be opened for each operation. Note: ID and Password are required in ADSL (with PPPoE) type. Note: Default TCP port is 10101 but it can be set from 1500 to 32000 if necessary. 2-5-2. [. . . ] - Click "Create additional domain names" to make another domain name. 59 CHRONO Series DVR 2. Router Configuration - Insert the gateway address in Internet Explorer to connect the homepage to the Router. - Go to "Port Forwarding" Menu. (The picture below is for a particular Router. ) - Insert the IP address and Port number for the DVR in the Port Forward menu. [. . . ]