User manual VITEK VTC-EBV49-24

[. . . ] VTC-EBV49/24 1/3" Color Bullet Camera with 540 TV Lines LIMITED LIABILITY WARRANTY VITEK Your new Camera is guaranteed to be free from defects in materials and workmanship for a period of two years from the date of purchase. The product must have been used only for its intended purpose, and not been subjected to damage by misuse, willful or accidental damage, caused by excessive voltage or lightning. The product must not have been tampered with in any way then the guarantee will be considered null and void. [. . . ] Unplug this unit during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel, Servicing is required when the unit has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does not operate normally or has been dropped. SPECIFICATIONS VTC-EVBV49/24 Image Pick-Up Device TV System Effective Pixels Scanning System Sync System Resolution Minimum Illumination S/N Ratio Gamma Characteristic Video Output Electronic Iris Power Supply Power Consumption Lens (Included) Operational Temp. Dimension (W x H x D) Weight 1/3" Super HAD High Resolution Color CCD NTSC 768H × 494V (380K pixels) 2:1 INTERLACE Internal / Line Lock 540TV Lines 0. 1 Lux More Than 50dB Internal / Line Lock selectable Composite: 1. 0 Vp-p / 75 Ohm 1/60 ~ 1/100, 000sec AC 24V 120mA Varifocal 4mm-9mm 14 Deg. ~ 122 Deg F (-10 Deg -+ 50 Deg C) 2. 76" x 3. 31" x 7. 48" (70mm x 84mm x 190mm) 17. 64 oz. Heed to all warnings and follow all instructions carefully. Do not install near any heat source such as radiators, heat resisters, stoves, or other apparatus (including amplifiers) that produce heat. 7. install in accordance with the instructions. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has to blades with one wider the other. A grounding type plug has to blades and a third grounding plug. [. . . ] 2) Connect video to the BNC video output and a AC 24V Power source to the Power input. 3) Adjust Focus and Zoom with the adjustment rings. 2 3 [. . . ]