User manual VITEK VTM-LCD601

[. . . ] VITEK requires that this "RA" number be printed clearly on the outside of the shipping carton to avoid refusal of said shipment. The Return Authorization number expires after 30 days. Products returned after (30) days are subject to refusal of returned merchandise. 6. 1" LCD Monitor VITEK · 6. 1" Color TFT LCD Display · 2 Switchable Video / 2 Stereo Audio Inputs (L/R) · 12VDC Auto-Activated Third Video Input for use in Rear Vision Mobile Applications 9970 GLENOAKS BLVD. UNIT B SUN VALLEY, CA 91352 PHONE: 888-VITEK-70 / 818-771-0300 FAX: 818-771-0400 WWW. VITEKCCTV. COM | SALES@VITEKCCTV. COM · IR Remote Control Included · Built-In Stereo Speakers · Mirror Function (Flip), Rotate (Up/Down) for Versatility in Mobile Applications 8 CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER, NO USER-SERVICEABLE PARTS INSIDE. [. . . ] Exception: A product that is meant for uninterrupted service and that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the product in the cleaning description otherwise required in 5). 6) Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7) Water and Moisture Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink, or laundry tube in a wet basement or near a swimming pool and the like. 8) Accessories Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. 9) An product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 10) Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 11) Power Sources This product should be operated only from the type of power resource indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power or other sources, refer to the operating instructions. SPECIFICATIONS VTM-LCD601 Display Size Pixel Resolution Contrast Ratio Display System Input Signal Video Input Audio Input Audio Out Internal Speakers Power Input Power Consumption OSD Functions Included Accessories Dimensions (W x H x D) Weight 6. 1" Color TFT 320 x 234 300:1 NTSC 1. 0 Vp-p composite, 75 Ohm 2 x RCA / Plus 1 Auto-Activated by 12VDC (3 Total) 2 x RCA (Stereo) 1 x 3. 5mm Mini-Stereo (Headphone Jack) 2 Internal Stereo Speakers 12VDC Power Supply (Included) 9W Brightness, Contrast, Saturation, Hue, Video Source, Image Flip / Image Rotate IR Remote Control, Removable Stand, A/V Patch Cable, 12VDC Plug-In Transformer 7. 13" x 4. 96" x 1. 41" (181mm x 126mm x 36mm) 22. 5 Oz. (638g) 2 7 IR REMOTE CONTROL 12) Grounding or Polarization This product is equipped with a three-wire groundingtype plug a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. 13) Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 14) Protective Attachment Plug The product is equipped with an attachment plug having overload protection. See instruction Manual for replacement or resetting of protective device. [. . . ] ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrodes. 16) Lightning For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug the product from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power line surges. 17) Power Lines An outside antenna should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. [. . . ]