User manual VITO TECHNOLOGY REMOTE

[. . . ] After you log in to your account, press Enter your User ID that can be found in About -> Register now. . . If USER ID is correct, you will see your registration key displayed. If you have any questions or problems regarding the registration process, please contact our registration support representative at registr@vitotechnology. com. Getting Started 1. Download and install the latest version of VITO Remote from our website: http://www. VitoTechnology. com. Launch VITO Remote from Programs/VITO Tech. [. . . ] - Tap button #4 (see the screenshot above) to display and train additional buttons which are useful for macro commands. Switch to Normal mode when you're done. Check Select from file radio button and tap Browse button. Select a code name to be used for that particular button, and tap [OK]. CCF files CCF files are standard configuration files for various universal remote controls. CCF files include IR signals and interface settings, and they can be downloaded from the internet. Visit www. remotecentral. com for details. To install a CCF file to your PocketPC: 1. Download or place it to your /Vito Remote/Devices folder. In VITO Remote, tap Main menu > Manage devices. The CCF file appears in the listing with a corresponding name. Select the file and tap [ok]. http://www. vitotechnology. com/manual/Remote/ (5 de 9)16/11/2005 0:21:49 http://www. vitotechnology. com/manual/Remote/ Skin Editor To create your own template from the ground, follow the step-by-step instructions below. Switch to Device manager and tap [Create]. Enter a name for the template and select "custom" from Device type list. Created template appears in device listing. Choose the created template from Device menu. Note:to delete any device from the list tap&hold it, then choose "Delete". Tap-n-hold at any place on the blank canvas to add a button. In appeared window set coordinates, shape and style for created button. Tap-n-hold on created button and choose Properties. enter a name for current button (required for hardware button mapping and voice commands); b. learn infrared signal from remote control or import from file. Repeat steps 4-6 to create and train additional buttons. [. . . ] If this doesn't help, train VITO Remote with original remote control. I constantly get message "Can't get IR signal" when acquiring signals from my remote control. Try to switch between COM ports in program settings. Please note that VITO Remote supports Consumer Infrared format only and may not work with some devices (e. g. [. . . ]