User manual VIVITAR VIVICAM 3305

[. . . ] Vivicam 3305 User Manual English 021009 Warranty Policy This camera is under warranty for one full year from the date of purchase by the orignal purchaser. In case of defects in materials or workmanship, we will replace or repair the camera free of charge. This warranty applies to the camera only. This warranty does not include batteries, or other accessories which have not been manufactured by our company. [. . . ] Select YES to re-format the CF card (default = NO). 24 TM Operating Modes and Menus RECORD Mode Set the operating mode to RECORD for image capturing. mode, the Record menu appears. Record Menu Press the Menu button in RECORD The menu contains the following items: LCD BRIGHTNESS: Changes the brightness setting (-5 ~ +5, Interval = 1) of the LCD display. Press the OK button to select this item. The cursor skips to the data field as the OK button being pressed. Use the arrow buttons ( / ) to increase/decrease the LCD brightness. Press the OK button again to make the change. The cursor returns to the RECORD menu automatically when the change is made. The setting is conserved even if the camera power is off. QUICKVIEW : Toggles On/Off the QuickView function. Select the item by the arrow buttons ( / ) and then press the OK button to confirm. The cursor skips to the data field as the OK button being pressed. Use the arrow buttons ( / ) to select the 25 desired setting. The cursor returns to the Record menu automatically when the change is made. The setting is conserved even if the camera power is off. WHITE BALANCE: Select either one of the 5 (Auto, Daylight, Shade, Fluorescent, Tungsten) manual white balance settings. The auto white balance is recommended for most cases. For certain critical circumstances, if the result did not come out as expected, you may manually change to another white balance type according to the ambient lighting condition. / Select the item by the arrow buttons ( ) and then press the OK button to confirm. The cursor skips to the data field as the OK button being pressed. Use the arrow buttons ( / ) to select the desired white balance type. Press the OK button again to make the change. [. . . ] Use the button to select/confirm the currently highlighted item. Power Button Press the power button to turn on/off the camera. While the camera is powered on and there is no button activity or host communication for about 60 seconds, the camera will automatically turn itself off to conserve battery power (standby) meanwhile press any button or rotate the Mode knob will bring the camera back immediately. If there is no any activity for 3 minutes, the system power will be off and you will have to press the power button to turn it on. [. . . ]