User manual VIVITAR VIVICAM 3745

[. . . ] Vivicam 3745 User Manual English 030521 FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] To increase the shots and conserve battery power, turn the LCD monitor off and use the viewfinder instead. 26 Reviewing the last picture in the record mode The camera is equipped with the button, allowing the most recent image to be displayed on the LCD monitor in the / mode. However, you can only view the last image with this function. To view all your recorded images, go to the mode. E If you intend to view the image just after taking a picture, you can press the button. The last image displays on the LCD monitor. To return to the record mode from the quick playback status and continue shooting, press the button again. 27 Using the optical zoom The lens moves during the zoom photography. Zoom photography allows you to take telephoto and wide-angle shots. The subject appears closer by pressing the button and appears farther away by pressing the button. E 1. 5. Turn the camera on by sliding the switch. Turn the mode dial to the Turn the LCD monitor on by pressing the ENTER button. Press the button ( button) to enlarge the subject. Press the shutter button down halfway, then press it the rest of the way down. 28 Using the digital zoom By using the digital zoom, images can be enlarged so that the subject appears closer. However, the more the image is enlarged, the grainier the image will become. The digital zoom function is only available when you set the LCD monitor and the digital zoom to on. To enable the digital zoom, refer to DIGITAL ZOOM in Record/Manual Record menu. Turn the camera on by sliding the switch. Turn the mode dial to the mode or the mode. Turn the LCD monitor on by pressing the ENTER button. Activate 2X digital zoom function by pressing the button again. To cancel digital zoom function, press the button. Press the shutter button down halfway, then press it the rest of the way down. E 2X NOTE · You can only set the digital zoom at the resolution of 2048 x1536 pixels; digital zoom is not available at the resolution of 1024x768 pixels. When you play back the image recorded with digital zoom, the image size is 1024x768 pixels. · The maximum zoom magnification is 2X for recording and 4X for viewing an image. [. . . ] You can also press the button again to exit. 59 Setup menu You can select your preferences on the camera settings in the mode. Switch the mode dial to the mode and then move to the option that you want to configure by using the / button. E DATE/TIME Press the ENTER button to enter the DATE/TIME sub-menu. And then refer to SETTING THE DATE AND TIME to do the setting. When removing the batteries or AC power adapter from the camera, the date and time may return to the default setting. [. . . ]