User manual VIVITAR VIVICAM 8400

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Rotate the mode dial to A and turn your ViviCam 8400 on by pressing the button. Compose your image with your main subject in the center of the focus frame. Press the shutter button down halfway to focus the image. When you press the shutter button down half way, the ViviCam 8400's Auto Focus feature automatically focuses the image. Proper exposure is determined and locked at the same time. With the shutter button held, you can reframe your image and the main subject will still be correctly exposed and in focus. Press the shutter button the rest of the way down to capture the image. Program Mode [ P ] In the P (Program) mode, the ViviCam 8400 automatically sets the shutter speed and aperture for taking still images. You can adjust other functions, such as flash mode or continuous shooting mode. Rotate the mode dial to P and turn your ViviCam 8400 on by pressing the button. Compose your image with your main subject in the center of the focus frame. Press the shutter button to capture the image. EN-31 Shutter Speed Priority Mode [ Tv ] If you set a fast shutter speed, you can capture images of moving subjects that look as if they are still. If you set a slow shutter speed, you can capture images that give the impression that the subject is in motion. Rotate the mode dial to Tv and turn your ViviCam 8400 on by pressing the button. Set the shutter speed with or , and press the 4. Press the shutter button to capture the image. Aperture Priority Mode [ Av ] In this mode, images are captured with the priority given to aperture. The shutter speed is automatically set according to the aperture. The aperture will affect the depth-of-field of the picture. If you set a large aperture (lower F value), you can capture portrait images with an out-of-focus background. Alternatively, if you set a small aperture (higher F value), both close objects and distant objects will be in focus, for example when capturing subjects in the foreground together with landscape images. Rotate the mode dial to Av and turn your ViviCam 8400 on by pressing the button. Set the aperture value with or , and press the 4. Press the shutter button to capture the image. EN-32 Manual Mode [ M ] In manual mode, the aperture value and the shutter speed can be varied individually. [. . . ] The captured images are recorded to the newly created folder from number 0001. If you want to reset the file number, be sure that no images are recorded in the internal memory or the SD memory card. * Yes / No Returns all basic settings to the ViviCam 8400's default settings. * Yes / No This displays the current firmware version of the ViviCam 8400. Set to Default D Version V. EN-66 CONNECTING THE VIVICAM 8400 TO OTHER DEVICES EN-67 VIVICAM 8400 SPECIFICATIONS Description CCD 8. 0 Mega pixels Still image: 3264 x 2448, 2272 x 1704, 1600 x 1200, 640 x 480 Video clip: 640 x 480 Image quality Still image: Fine, Normal, Economy Movie image: Economy Recording media 32MB internal memory SD memory card (Optional, up to 1GB) File format Still image: JPEG; Video: ASF Lens F-no. : Wide: 2. 8 / Tele: 4. 8 Focal length: 7. 5mm~22. 5mm (Equivalent 36~108mm) Focus range Normal: 50 cm (20 in. )-infinity Wide: 6 cm (2. 5 in. )-infinity Tele: 30 cm (12 in. )-infinity LCD monitor 2. 0" LTPS color LCD High-resolution 130K pixel display Self-timer 10 sec delay, 2 sec delay, 10+2 sec delay Exposure compensation -2. 0EV~ +2. 0EV (in 0. 3EV increments) White balance Auto, Daylight, Cloudy, Tungsten, Fluorescent ISO Auto, 50, 100, 200 Interface DC-IN jack, USB connector, A/V terminal Power 2xAA Alkaline or optional Ni-MH Batteries (2000 mAh or higher suggested) AC-DC Adapter (3V/2. 5A) (Optional) Dimensions Approx. [. . . ]