User manual VODAFONE SONIM XP1 DATASHEET

[. . . ] Declaration of Conformity Sonim Technologies Inc, declares that the mobile phone Sonim XperienceTM One ­ XP1 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Contents General information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Network services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Sonim support information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Use the guide effectively. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To access Call forward settings select Menu > Settings > Call settings > Call forward > OK. You can use this function to stop incoming calls. You can set Call barring facility for outgoing calls, international calls, local calls and all incoming or roaming incoming calls. To set Call barring settings select Menu > Settings Call settings > OK > Call barring > OK. (Your network operator provides this before you use this function). This password will be sent to the network for verification. Cancel barring: when you cancel the call barring facility you are prompted to enter a restriction password again. If the password is correct, your phone will contact the network to disable this function. Barring status: when you check the status, your phone will send a request to the network and the feedback will be displayed on your screen. When Call forward is enabled, the icon is displayed at the top of the screen when the phone is in standby mode. Call Forward option Unconditional If busy If no reply Function Forward all incoming calls to a pre-designated number. Forward calls when you do not answer the incoming calls. Forward calls when you have switched off your phone. Send ID: when enabled displays your ID to the recipient when you call or send a message. However this service must be supported by your network. Select Menu > Settings > Call settings > Send ID >OK. Select Status > OK to view whether the option is enabled or not. Call filter settings You can enable or disable the call filter settings. On the Call filter screen, select Call filter settings > OK. Enable black list: rejects all incoming calls from numbers in the black list. Enable white list: answers incoming calls from numbers listed in the white list, and rejects incoming calls from numbers that are not available in the list. Close filter: disallows filtering for incoming calls. Other call settings Minute reminder: when enabled prompts you at the 50th second of every minute during a conversation. Select Menu > Settings > Call settings > Minute beep > On. 31 Make calls 1. To locate a black listed number, on the Call filter screen, select Blacklist > Search > OK. Scrolll to a number and select Option > Change > OK to modify a number or select Option > Delete > OK to remove a number from the black list. Anykey answer: when enabled allows you to press Make calls Review call information 1. Select Menu > Call list > Call meters > OK. [. . . ] This is the default mode, but the parameters can be customized. To activate the Normal mode, select Normal > Enable > OK. You can also customize the name of this profile, select Normal > Change name. To personalize the alerts in this mode, select Normal > Personalize > OK. [. . . ]