User manual VODAVI STARPLUS STSE

[. . . ] STARPLUS STSe Station User Guide August 2005 - Issue 1. 0 P/N: 3551-00 I Issue 1. 0 Release Date 8-05 Initial Release Changes LIFE SUPPORT APPLICATIONS POLICY VODAVI Technology, Inc. products are not authorized for and should not be used within Life Support applications. Life Support systems are equipment intended to support or sustain life and whose failure to perform when properly used in accordance with instructions provided can be reasonably expected to result in significant personal injury or death. warranty is limited to replacement of defective components and does not cover injury to persons or property or other consequential damages. [. . . ] LCR feature enabled precludes Loop button access. STSe Station User Guide August 2005 Caller ID Display 33 SINGLE LINE TELEPHONE While connected to an outside line (PBX/Centrex): 1. Dial the desired outside line destination number. Hang up to complete the transfer. E911 feature enabled precludes dial 9 access. Caller ID Display Caller ID Display (Answered Calls) The Answered Caller ID Table feature can store up to 100 systemwide entries of the most recently answered calls with caller ID. A station may dial a unique access code to view the entries, scroll through the entries, and dial a desired entry back. The table displays the caller ID number and the identity of the station that answered the call. This table may be accessed from any user station display phone. Any Attendant station can delete a table entry, one entry at a time. To start the review process at the beginning of the table: Dial [659]. STSe Station User Guide August 2005 34 Caller ID Display Caller ID Display (Unanswered Calls) An Unanswered Call Management Table with 100 system-wide entry capacity is maintained in the system. The calling number/ name information pertaining to any unanswered call is placed in this table when the system determines the call was abandoned. This table may be accessed from any display telephone to review unanswered calls. Only an Attendant station(s) can delete an entry from this table. To start the review process at the beginning of the table: Dial [635]. Keypad Functions The following functions apply to both Answered and Unanswered Call Management Tables: Function Review next item in table entry Step to next table entry Delete table entry (Attendant only) Exit table review function Step to previous table entry Call Back Button MUTE HOLD FLASH ON/OFF TRANSFER SPEED STSe Station User Guide August 2005 Caller ID Name/Number 35 Caller ID Name/Number This feature allows you to program a flexible button [653] to view both the number and name on the LCD when receiving a Caller ID CO call. When the feature is enabled, the flexible button LED is lit solid and the name and number is displayed. During the call: Press the flexible button to toggle between the normal call information display and the name/number display. The top line of the LCD displays the number of the caller and the bottom line of the LCD displays the name. Calling Forward Override The Call Forward Override feature allows a user to reach a busy station that is call forwarded. This allows the calling station to override the forwarding which allows the user to use Off Hook Voice Over (OHVO), Executive Override, Monitor, Message Wait Indication, Camp On, or Call Back Request at that station rather than forwarding to another destination. To reach a busy station that is call forwarded: 1. Dial [5#] followed by the desired station extension. Press the appropriate preprogrammed button. Call Back = [622] Camp On = [620] Executive Override = [625] Message Wait = [623] OHVO = [628] STSe Station User Guide August 2005 36 Calling Station Handsfree Mode Override Calling Station Handsfree Mode Override This feature enables a calling station to override a called station's T intercom setting. When placing a call to a station and handsfree is desired: 1. Dial the extension number, -orPress the DSS button of the desired station (the call connects to the station in a handsfree mode). Calling Station Tone Mode Override This feature enables a calling station to override a called station's H or P intercom settings. [. . . ] Cancel Send Options Notification Settings Mailbox State Distribution List Guest Mailbox August 2005 STSe Station User Guide 96 Voice Mail Voice Mail (Hard Drive-Based) Quick Start The following procedure will assist first-time users: 1. Obtain System Administrator information: » » » 2. Voice mail system access number Your mailbox number Your temporary password Dial voice mail system access number. Once connected, enter your mailbox number. [. . . ]