User manual VOGELS VLB 500 PACKAGING BACK

[. . . ] Important Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine. Software Version Conventions Used in This Manual · · NetWare 3. x means NetWare 3. 12 and 3. 2. NetWare 4. x means NetWare 4. 1, 4. 11, 4. 2 and IntranetWare. Trademarks Microsoft®, Windows® and Windows NT® are registered trademarks of Microsoft Corporation in the United States and/or other countries. [. . . ] · ip1394 can be specified only when the IEEE 1394 interface is installed. · wlan can be specified only when the IEEE 802. 11b interface is installed. Interface name ether ip1394 wlan Interface configured Ethernet interface IEEE 1394 interface IEEE 802. 11b interface CNAME registration msh> dns cname {on|off} · You can specify whether to register CNAME. · {on} means "active" and {off} means "inactive". · The CNAME registered is the default name beginning with rnp. A records registration msh> dns arecord {dhcp|own} · {dhcp} You can specify the method of registering an A record when the dynamic DNS function is enabled and DHCP is used. · {own} To register an A record using the printer as the DNS client. The DNS server address and the domain name already designated are used for the registration. Record updating interval settings msh> dns interval "time" · You can specify the interval after which records are updated when using the dynamic DNS function. · The updating interval is specified hourly. It can be entered between 1 and 255 hours. · The default is 24 hours. Specifying the record overlap operation msh> dns overlap {update|add} · You can specify operations performed when records overlap. msh> ipp timeout [30 - 65535] IPP user authorization configuration Use IPP user authorization to restrict users to print with IPP. msh> ipp auth {basic|digest|off} · User authorization settings are "basic" and "digest". · If user authorization is specified, register a user name. IPP user configuration Configure IPP users according to the following messages: msh> ipp user The following message appears: msh> Input user number (1 to 10): Enter the number, user name, and password. msh> IPP user name:user1 msh> IPP password:******* After configuring the settings, the following message appears: User configuration changed. 69 2 info Use the "info" command to display printer information such as paper tray, output tray, and printer language. Printer information display msh> info Reference p. 86 "Getting Printer Information over the Network" Monitoring and Configuring the Printer ipv6 Use the "ipv6" command to display and configure IPv6 settings. Remote Printer Number msh> netware rnum {0­254} Timeout msh> netware timeout {3­255} Printer server mode msh> netware mode pserver msh> netware mode ps Remote printer mode msh> netware mode rprinter msh> netware mode rp NDS context name msh> netware context character string SAP interval msh> netware "sap_interval" Setting login mode for file server msh> netware login server Setting login mode for NDS tree msh> netware login tree Setting login mode for NDS tree name msh> netware tree "NDS name" File transfer protocol msh> netware trans {ipv4pri| ipxpri|ipv4|ipx} · If you do not specify the protocol, the current setting is displayed. Protocol ipv4pri ipxpri ipv4 ipx Set Protocol IPv4+IPX(IPv4) IPv4+IPX(IPX) IPv4 IPX 2 View Setting msh> ipv6 IPv6 stateless address msh> ipv6 stateless {on|off} lpr Use the "lpr" command to view and configure LPR settings. View Setting msh> lpr Checking host name when deleting the job msh> lpr chkhost {on|off} netware Use the "netware" command to view and configure the NetWare settings such as the print server name or file server name. Netware Printer Server Names msh> netware pname character string · Enter the NetWare print server name using up to 47 characters. Netware File Server Names msh> netware fname character string · Enter the NetWare file server name using up to 47 characters. Encap type msh> netware encap {802. 3| 802. 2|snap|ethernet2|auto} 70 Remote Maintenance by telnet passwd Use the "passwd" command to change the remote maintenance password. route Use the "route" command to view and control the routing table. Changing the Password msh> passwd · Enter the current password. · Renter the new password to confirm it. Changing the Password of the administrators using the Supervisor msh> passwd {Administrator ID} · Enter the new password. · Renter the new password to confirm it. Note Be sure not to forget or lose the password. Specified route information display msh> route get "destination" · Specify the IPv4 address to destination. [. . . ] · When using ScanRouter V2 Professional, DeskTopBinder Lite/Professional, Auto Document Link, or a TWAIN driver on a computer with dial-up access, a dial-up connection may be performed when connecting to the delivery server and other equipment, depending on the setup. If the computer is set up to connect to the Internet automatically, the confirmation dialog box will not appear, and telephone charges may be incurred without your being aware of it. To prevent unnecessary connections, the computer should be set up so the confirmation dialog box always appears before establishing a connection. Do not make unnecessary connections when using the above listed software. 122 Precautions NetWare Printing Form feed You should not configure form feed on NetWare. [. . . ]