User manual VOLTA 4558 PEAR GREEN

[. . . ] 4 2. 2 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. 3 Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. 4 Disposing of the WiFi TV adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. 5 Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] It does not determine the security, the security settings which you wish to use have to be set in your access point. If the security in you access point has been set it is required to set the clients to the same security configuration. There are several things you can do to improve wireless security: 1. Only disable it when you want to open your wireless network to the public. Never use simple words as encryption password. Use the random combination of symbols, numbers, and alphabets will greatly improve security. Use WPA when possible - it's much safer than WEP. Change encryption password when you’ve used it for too long time. 2. 3. 4. Disable Security When you select ‘Disabled’, wireless encryption for the network is disabled. After you finish with setting, please click ‘Apply’. WPA Pre-shared Key WPA Pre-shared key is the safest encryption method currently, and it’s recommended to use this encryption method to ensure the safety of your data. When you select ‘WPA pre-shared key’ as encryption type, the following messages will be displayed: WPA Unicast Cipher Suite Pre-shared Key Format Pre-shared Key Available options are: WPA (TKIP), WPA2 (AES), and WPA2 Mixed. You can select one of them, but you have to make sure your Access point supports the cipher you selected. Please select the format of pre-shared key here, available options are ‘Passphrase’ (8 to 63 alphanumerical characters) and ‘Hex (64 hexadecimal characters – 0 to 9 and a to f). Passphrase Key: Displays the WPA passphrase here, all characters will be replaced by asterisk for security reasons. If encryption is not set on this WiFi TV adapter, nothing will be displayed here. Click ‘Start PBC’ to start Push-Button style WPS setup procedure. This WiFi TV adapter will wait for WPS requests from wireless clients for 2 minutes. The ‘WLAN’ LED on the WiFi TV adapter will be steady on for 2 minutes when this WiFi TV adapter is waiting for incoming WPS request. Please input the Self-PIN code of the wireless client you Start PBC Start PIN via client wish to connect, and click ‘Start PIN’ button. The ‘WLAN’ LED on the WiFi TV adapter will be steady on when this WiFi TV adapter is waiting for incoming WPS request. NOTE: When you’re using PBC type WPS setup, you must press ‘PBC’ button (hardware or software) of your Access point within 120 seconds; if you didn’t press PBC button of wireless client within this time period, please press ‘PBC’ button (hardware or software) of this WiFi TV adapter again. 8 Toolbox 8. 1 System 8. 1. 2 Change Password You can change the password used to enter the web configuration menu of this WiFi TV adapter. Please input current password in ‘Current Password’ field, then input new password in both ‘New Password’ and ‘Confirm Password’ field. After you finish, please go to the bottom of this page and click ‘Apply’. 8. 1. 3 IP management You can change the IP address of this WiFi TV adapter, so it can become a part of your local network. Please remember this address or you will not be able to connect the configuration menu of this WiFi TV adapter. Default IP address is: 192. 168. 0. 234 / Subnet Mask 255. 255. 255. 0, you can press and hold ‘Reset/WPS’ button over 15 seconds to change the IP address back to default value if you forget the IP address you set. If you want to activate the DHCP server function of this WiFi TV adapter, please select ‘Enabled’ in ‘DHCP Server’ option, and see next Section for detailed instructions; if you don’t want to use DHCP server function of this WiFi TV adapter, or there’s another DHCP server on the network this TV link adapter connects to, please select ‘Disable’. After you finish, please go to the bottom of this page and click ‘Apply’. 8. 1. 4 DHCP Server This WiFi TV adapter is capable to act as a DHCP server for your network. [. . . ] However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. [. . . ]